Martin Preuss
81e9078b80
avr: add MODE variable to sk6812 module.
...
this allows for better control over led strips.
Modes:
- AUTO: allow other modules to switch LED strip
- OFF: force LED strip off
- ON: force LED strip on
2025-10-01 23:24:50 +02:00
Martin Preuss
0f712717d8
sk6812: added readme.
2025-09-22 22:48:37 +02:00
Martin Preuss
68829f6428
add comments.
2025-09-22 20:26:30 +02:00
Martin Preuss
666e7690a6
avr: improved module SK6812 and app MA_LIGHT.
...
- RGBW values are now only set by SK6812
- MA_LIGHT can now also take into account a brightness value reported
by any node to switch on light only after dawn
2025-09-22 15:09:45 +02:00
Martin Preuss
1c8e9134bf
com2wi2: added some comments
2025-09-12 15:07:14 +02:00
Martin Preuss
3ea7170473
tried early reading ports (still doesn't work for 2nd port).
2025-09-09 01:01:43 +02:00
Martin Preuss
0dc9f0330c
increase irq frequency (now every 10us).
2025-09-09 00:47:24 +02:00
Martin Preuss
a81acf7b19
com2wi2: test with two interfaces.
2025-09-08 23:34:38 +02:00
Martin Preuss
d7e4ee4cca
fixed bugs on big systems.
2025-09-08 22:06:09 +02:00
Martin Preuss
40282486f6
added com2wi2 (will become com2wi later).
2025-09-08 22:05:28 +02:00
Martin Preuss
2b2c41867f
com2w: fixed a bug (on CRC error the buffer is not yet allocated).
2025-09-08 22:04:53 +02:00
Martin Preuss
2d15091b0c
avr: updated uartfd0 (copied from uartfd1)
2025-09-06 00:42:49 +02:00
Martin Preuss
81598881d1
uartfd1: fixed typos.
2025-09-06 00:42:20 +02:00
Martin Preuss
4a74a9990f
minor fixes.
2025-09-06 00:41:58 +02:00
Martin Preuss
6c1e8a45ff
com2wn: only trigger led if LED_ACTIVITY is defined.
2025-09-06 00:41:17 +02:00
Martin Preuss
808a7c4258
com2w: check COM_ACCEPT_ALL_DEST
2025-09-06 00:40:42 +02:00
Martin Preuss
1612065d8a
uartfd1: add comment.
2025-09-01 23:25:39 +02:00
Martin Preuss
eac37b9927
com2w: increase buffer size.
2025-09-01 23:25:20 +02:00
Martin Preuss
b95a4fa872
avr: more work on com2wn module.
2025-09-01 23:25:02 +02:00
Martin Preuss
81669a5442
avr: first try irq driven com2w interface.
...
probably doesn't work like that but that's for later.
2025-09-01 23:24:15 +02:00
Martin Preuss
3270a71cb0
com2w: simplified module.
2025-09-01 23:23:30 +02:00
Martin Preuss
9b86aea7ed
use led_activity.
2025-08-25 11:25:53 +02:00
Martin Preuss
5bfb49d9e1
simplified code, remove unused code.
2025-08-25 11:25:30 +02:00
Martin Preuss
32a0ad5eae
added comments, removed unused code.
2025-08-25 11:24:53 +02:00
Martin Preuss
77d3a201f5
improved uartfd1.
2025-08-25 10:24:48 +02:00
Martin Preuss
127525e3ec
buffer: gather statistics
2025-08-25 10:23:47 +02:00
Martin Preuss
6e062d3f60
improve stats reporting
...
now again use three messages to transmit stats (much more efficient than
sending single values, also more acurate).
2025-08-25 10:22:05 +02:00
Martin Preuss
7efaf720cc
com2w: work in COM2W_Run, not in COM2W_Every100ms
2025-08-25 10:20:13 +02:00
Martin Preuss
66ac029a69
avr: introduce two more led modules.
...
- led_signal: blink 8 status bits (short=0, long=1)
- led_activity: blink for a short period after a trigger, e.g. for network
activity
2025-08-25 10:19:23 +02:00
Martin Preuss
87788fa93c
avr: wait for free CLK line on error when in flash mode
2025-08-23 00:09:39 +02:00
Martin Preuss
08d420a871
avr: added module uart_fd
...
This module uses hardware UART of MCUs in full duplex mode.
2025-08-23 00:08:25 +02:00
Martin Preuss
3a7951be16
com2w: added some recovery code, improved protocol.
...
after sending a byte wait for the same time when sending the last bit as
with the other bits (otherwise the last bit might get lost by slower
devices).
2025-08-20 23:27:17 +02:00
Martin Preuss
6a3f6be8a9
avr: improved timing for sending bytes via com2w interface.
...
Still quite different among devices but that's just prove that the protocol
works without prior synchronisation.
2025-08-20 20:48:55 +02:00
Martin Preuss
6c3926c1e4
avr: added a note regarding timing.
2025-08-19 23:36:58 +02:00
Martin Preuss
8467408fd8
avr: increased waittimes for com2w (too fast for 1MHz nodes).
2025-08-19 23:36:44 +02:00
Martin Preuss
6bb499740d
avr: use 16bit for brightness (actually, ADC only presents 10 bit).
2025-08-19 23:03:43 +02:00
Martin Preuss
fc073696f8
avr: tweaked timing for com2w transport layer.
2025-08-19 23:03:15 +02:00
Martin Preuss
d9e7d4df81
com2w*: allow for higher frequencies than 8MHz
...
to be used with node S03, which is run at 20MHz.
2025-08-18 18:04:30 +02:00
Martin Preuss
9b1badb310
avr: introduce reference counter for network buffers.
2025-08-18 18:03:24 +02:00
Martin Preuss
8c13f9fdf7
avr: started adding com2wn module (multiple com2w devices in one)
2025-08-03 00:55:52 +02:00
Martin Preuss
6c5dc21f6a
avr: started adding r06 device.
2025-08-03 00:55:21 +02:00
Martin Preuss
2b25fed2cd
com2w1: follow changes in com2w0.
2025-07-21 18:25:17 +02:00
Martin Preuss
66b298d977
guard some changes on network data with CLI.
2025-07-20 23:15:46 +02:00
Martin Preuss
1091ec1dee
read CLK and DATA early.
2025-07-20 23:15:22 +02:00
Martin Preuss
d0b5f84316
adapt com2w1 from com2w0 (the latter is proven to work now).
2025-07-20 00:15:13 +02:00
Martin Preuss
ae1e4c3e37
avr: bootloader works with new com2w code.
2025-07-20 00:05:53 +02:00
Martin Preuss
78cbbf334e
com2w: alloc buffer after receiving message. receiving works now.
2025-07-19 17:47:52 +02:00
Martin Preuss
ae1853ba62
enable sending messages.
2025-07-19 17:08:19 +02:00
Martin Preuss
59a0962420
added com2w0
2025-07-19 15:02:31 +02:00
Martin Preuss
323a5b76be
sync test.
2025-07-19 09:48:56 +02:00
