added missing files, n26, increased firmware version.

0BUILD

@@ -2,7 +2,7 @@
 
 <gwbuild>
 
-  <project name="aqhome" version="0.0.10" so_current="0" so_age="0" so_revision="10" write_config_h="TRUE">
+  <project name="aqhome" version="0.0.11" so_current="0" so_age="0" so_revision="11" write_config_h="TRUE">
     <setVar name="package">$(project_name)</setVar>
     <setVar name="version">
       $(project_vmajor).$(project_vminor).$(project_vpatchlevel)
@@ -128,6 +128,7 @@
     </option>
 
 
+
     <checkheaders>
       signal.h
       sys/stat.h

avr/devices/c01/main/main.asm

@@ -21,6 +21,7 @@
 .include "./data.asm"
 
 .include "devices/all/defs.asm"
+.include "common/calls.asm"
 .include "common/utils_wait.asm"
 .include "common/utils_io.asm"
 

avr/devices/n19/README

@@ -0,0 +1,13 @@
+
+N19
+===
+
+- Role: Air quality and climate sensors
+- MCU: AtTiny84
+- Connection: RJ45
+- Periphery:
+  - PIR sensor (AMN31112)
+  - TWI interface
+    - SI7021 temperature and humidity sensor
+    - CCS811 air quality sensor
+

avr/devices/n21/0BUILD

@@ -12,6 +12,10 @@
     README
   </extradist>
 
+  <data dist="true" install="$(datadir)/aqhome/devices/nodes">
+    aqua_n21.xml
+  </data>
+
 
 </gwbuild>
 

avr/devices/n21/aqua_n21.xml

@@ -7,6 +7,7 @@
   <values>
     <value name="SI7021_TEMP"  id="0x01" type="sensor" dataType="rational" modality="temperature" units="C" denom="100" />
     <value name="SI7021_HUM"   id="0x02" type="sensor" dataType="rational" modality="humidity"    units="%" denom="1" />
+    <value name="ADC"          id="0x03" type="sensor" dataType="uint16"                                    denom="1" />
     <value name="MOTION"       id="0x07" type="sensor" dataType="rational" modality="motion"                denom="1" />
     <value name="DOOR"         id="0x08" type="sensor" dataType="rational" modality="door"                  denom="1" />
 
@@ -18,10 +19,6 @@
     <value name="stats_collision_errors" id="0xe5" type="sensor" dataType="uint16" denom="1" />
     <value name="stats_busy_errors"      id="0xe6" type="sensor" dataType="uint16" denom="1" />
 
-    <value name="stats_heap_used"        id="0xe7" type="sensor" dataType="uint16" denom="1" />
-    <value name="stats_heap_free"        id="0xe8" type="sensor" dataType="uint16" denom="1" />
-    <value name="stats_noram_errors"     id="0xe9" type="sensor" dataType="uint16" denom="1" />
-
     <value name="LEDTIMING"    id="0x88" type="actor"  dataType="uint16" />
   </values>
 

avr/devices/n22/README

@@ -5,6 +5,8 @@ N22
 - Role: LED strip controller
 - MCU: AtTiny85
 - Connection: RJ45
+- Predecessor: N16
+- UART: uart_bitbang2
 - Periphery:
   - LED strip connection (SK6812)
   - OWI interface

avr/devices/n23/README

@@ -5,6 +5,7 @@ N23
 - Role: Air quality and climate sensors
 - MCU: AtTiny84
 - Connection: RJ45
+- Predecessor: N19
 - Periphery:
   - PIR sensor (AMN31112)
   - TWI interface

avr/devices/n23/aqua_n23.xml

@@ -20,10 +20,6 @@
     <value name="stats_collision_errors" id="0xe5" type="sensor" dataType="uint16" denom="1" />
     <value name="stats_busy_errors"      id="0xe6" type="sensor" dataType="uint16" denom="1" />
 
-    <value name="stats_heap_used"        id="0xe7" type="sensor" dataType="uint16" denom="1" />
-    <value name="stats_heap_free"        id="0xe8" type="sensor" dataType="uint16" denom="1" />
-    <value name="stats_noram_errors"     id="0xe9" type="sensor" dataType="uint16" denom="1" />
-
     <value name="LEDTIMING"    id="0x88" type="actor"  dataType="uint16" />
   </values>
 

avr/devices/n24/README

@@ -5,6 +5,7 @@ N24
 - Role: Air quality and climate sensors
 - MCU: AtTiny84
 - Connection: RJ45
+- Predecessor: N23, N19
 - Periphery:
   - PIR sensor (AMN31112)
   - TWI interface

avr/devices/n24/aqua_n24.xml

@@ -11,6 +11,7 @@
     <value name="SGP40_VALUE"  id="0x08" type="sensor" dataType="rational" modality="tvoc"                  denom="1" />
     <value name="SGP30_TVOC"   id="0x09" type="sensor" dataType="rational" modality="tvoc"                  denom="1" />
     <value name="SGP30_CO2"    id="0x0a" type="sensor" dataType="rational" modality="co2"                   denom="1" />
+    <value name="LIGHT"        id="0x0b" type="sensor" dataType="rational" modality="light"                 denom="1" />
 
     <value name="stats_packets_in"       id="0xe0" type="sensor" dataType="uint16" denom="1" />
     <value name="stats_packets_out"      id="0xe1" type="sensor" dataType="uint16" denom="1" />
@@ -20,10 +21,6 @@
     <value name="stats_collision_errors" id="0xe5" type="sensor" dataType="uint16" denom="1" />
     <value name="stats_busy_errors"      id="0xe6" type="sensor" dataType="uint16" denom="1" />
 
-    <value name="stats_heap_used"        id="0xe7" type="sensor" dataType="uint16" denom="1" />
-    <value name="stats_heap_free"        id="0xe8" type="sensor" dataType="uint16" denom="1" />
-    <value name="stats_noram_errors"     id="0xe9" type="sensor" dataType="uint16" denom="1" />
-
     <value name="LEDTIMING"    id="0x88" type="actor"  dataType="uint16" />
   </values>
 

avr/devices/n24/defs.asm

@@ -13,7 +13,7 @@
 ;                                 AtTiny84
 ;                                 --------
 ;                            VCC  1     14  GND
-;                  AUX-PB0   PB0  2     13  PA0  AUX-PA0
+;                  AUX-PB0   PB0  2     13  PA0  LUM
 ;                  PIR       PB1  3     12  PA1  COM-DATA
 ;                  /RESET    PB3  4     11  PA2  AUX-PA2
 ;                            PB2  5     10  PA3  LED

avr/devices/n25/aqua_n25.xml

@@ -23,10 +23,6 @@
     <value name="stats_collision_errors" id="0xe5" type="sensor" dataType="uint16" denom="1" />
     <value name="stats_busy_errors"      id="0xe6" type="sensor" dataType="uint16" denom="1" />
 
-    <value name="stats_heap_used"        id="0xe7" type="sensor" dataType="uint16" denom="1" />
-    <value name="stats_heap_free"        id="0xe8" type="sensor" dataType="uint16" denom="1" />
-    <value name="stats_noram_errors"     id="0xe9" type="sensor" dataType="uint16" denom="1" />
-
     <value name="LEDTIMING"    id="0x88" type="actor"  dataType="uint16" />
   </values>
 

avr/devices/n26/.gitignore

@@ -0,0 +1,2 @@
+*.eep.hex
+*.obj

avr/devices/n26/0BUILD

@@ -0,0 +1,22 @@
+<?xml?>
+
+<gwbuild>
+
+  <subdirs>
+    boot
+    main
+  </subdirs>
+
+  <data dist="true" install="$(datadir)/aqhome/devices/nodes">
+    aqua_n26.xml
+  </data>
+  
+  <extradist>
+    defs.asm
+    README
+  </extradist>
+  
+
+</gwbuild>
+
+

avr/devices/n26/README

@@ -0,0 +1,11 @@
+
+N26
+===
+
+- Role: Air quality sensors
+- MCU: AtTiny84
+- Connection: RJ45
+- Periphery:
+  - TWI interface
+    - SGP-30/40 air quality sensor
+

avr/devices/n26/aqua_n26.xml

@@ -0,0 +1,22 @@
+
+<device name="aqua_n26" driver="nodes">
+  <manufacturer>AQUA</manufacturer>
+  <devicetype>N</devicetype>
+  <deviceversion>26</deviceversion>
+  
+  <values>
+    <value name="SGP30_TVOC"   id="0x09" type="sensor" dataType="rational" modality="tvoc"                  denom="1" />
+    <value name="SGP30_CO2"    id="0x0a" type="sensor" dataType="rational" modality="co2"                   denom="1" />
+
+    <value name="stats_packets_in"       id="0xe0" type="sensor" dataType="uint16" denom="1" />
+    <value name="stats_packets_out"      id="0xe1" type="sensor" dataType="uint16" denom="1" />
+    <value name="stats_content_errors"   id="0xe2" type="sensor" dataType="uint16" denom="1" />
+    <value name="stats_io_errors"        id="0xe3" type="sensor" dataType="uint16" denom="1" />
+    <value name="stats_nobuf_errors"     id="0xe4" type="sensor" dataType="uint16" denom="1" />
+    <value name="stats_collision_errors" id="0xe5" type="sensor" dataType="uint16" denom="1" />
+    <value name="stats_busy_errors"      id="0xe6" type="sensor" dataType="uint16" denom="1" />
+
+    <value name="LEDTIMING"    id="0x88" type="actor"  dataType="uint16" />
+  </values>
+
+</device>

avr/devices/n26/boot/0BUILD

@@ -0,0 +1,32 @@
+<?xml?>
+
+<gwbuild>
+
+  <target type="AvrHexFile" name="n26_boot" >
+
+    <includes type="avrasm" >
+      -I $(builddir)
+      -I $(srcdir)
+      -I $(topsrcdir)/avr
+      -I $(topbuilddir)/avr
+    </includes>
+
+
+    <sources type="avrasm" >
+      boot.asm
+    </sources>
+
+
+  </target>
+
+
+  <subdirs>
+  </subdirs>
+
+  <extradist>
+  </extradist>
+  
+
+</gwbuild>
+
+

avr/devices/n26/boot/boot.asm

@@ -0,0 +1,157 @@
+; ***************************************************************************
+; copyright   : (C) 2025 by Martin Preuss
+; email       : martin@libchipcard.de
+;
+; ***************************************************************************
+; * This file is part of the project "AqHome".                              *
+; * Please see toplevel file COPYING of that project for license details.   *
+; ***************************************************************************
+
+
+; ***************************************************************************
+; Source file for base system node on AtTiny 84
+;
+; This is for the maintenance system (i.e. the flash loader).
+;
+; All definitions and changes should go into this file.
+; ***************************************************************************
+
+.equ clock=1000000 ; Define the clock frequency
+
+.nolist
+.include "include/tn84def.inc" ; Define device ATtiny84
+.list
+
+.include "version.asm"
+.include "../defs.asm"
+
+.include "common/calls.asm"
+.include "devices/all/defs.asm"
+
+
+#define COM_ACCEPT_ALL_DEST
+
+
+
+; ***************************************************************************
+; defines
+
+; ---------------------------------------------------------------------------
+; generic
+
+.include "common/utils_wait.asm"
+.include "modules/com2/defs.asm"
+.include "modules/comproto/defs.asm"
+
+
+
+; ---------------------------------------------------------------------------
+; firmware settings
+
+
+
+; ---------------------------------------------------------------------------
+; LED
+
+.equ LED_DDR             = DDRA
+.equ LED_PORT            = PORTA
+.equ LED_PIN             = PINA
+.equ LED_PINNUM          = PORTA3
+
+
+; ***************************************************************************
+; code segment
+
+.cseg
+.org 0x0000
+
+
+
+; ---------------------------------------------------------------------------
+; Reset and interrupt vectors
+;  rjmp start ; Reset vector
+  rjmp main ; Reset vector
+  reti ; EXT_INT0
+  reti ; PCI0
+  reti ; PCI1
+  reti ; WATCHDOG
+  reti ; ICP1
+  reti ; OC1A
+  reti ; OC1B
+  reti ; OVF1
+  reti ; OC0A
+  reti ; OC0B
+  reti ; OVF0
+  reti ; ACI
+  reti ; ADCC
+  reti ; ERDY
+  reti ; USI_STR
+  reti ; USI_OVF
+
+
+devInfoBlock:        ; 12 bytes
+devInfoManufacturer: .db 'A', 'Q', 'U', 'A'
+devInfoId:           .db DEVICEINFO_ID, 0
+devInfoVersion:      .db DEVICEINFO_VERSION, DEVICEINFO_REVISION             ; version, revision
+firmwareVersion:     .db FIRMWARE_VARIANT_BOOT, FIRMWARE_VERSION_MAJOR
+                     .db FIRMWARE_VERSION_MINOR, FIRMWARE_VERSION_PATCHLEVEL
+
+firmwareStart:   rjmp main ; will be overwritten when flashing
+
+
+
+; ***************************************************************************
+; main code
+
+
+.org BOOTLOADER_ADDR
+
+
+main:
+  rjmp bootLoader ; this routine is in modules/bootloader/main.asm
+
+
+
+; ***************************************************************************
+; includes
+
+.include "common/utils_wait_fixed.asm"
+.include "common/utils_copy_from_flash.asm"
+.include "common/utils_copy_sdram.asm"
+
+.include "modules/flash/defs.asm"
+.include "modules/flash/eeprom.asm"
+.include "modules/flash/io.asm"
+.include "modules/flash/io_attn.asm"
+.include "modules/flash/io_bitbang.asm"
+.include "modules/flash/flash1p.asm"
+.include "modules/flash/flashxp.asm"
+.include "modules/flash/flashprocess.asm"
+.include "modules/flash/wait.asm"
+.include "modules/bootloader/main.asm"
+.include "modules/network/msg/defs.asm"
+.include "modules/network/msg/crc.asm"
+
+;.include "common/debug.asm"
+
+
+
+systemSetSpeed:
+.if clock == 8000000
+  ldi r16, (1<<CLKPCE)
+  ldi r17, 0
+  out CLKPR, r16
+  out CLKPR, r17
+.endif
+
+.if clock == 1000000
+  ldi r16, (1<<CLKPCE)
+  ldi r17, (1<<CLKPS1) | (1<<CLKPS0)
+  out CLKPR, r16
+  out CLKPR, r17
+.endif
+  ret
+
+
+
+

avr/devices/n26/defs.asm

@@ -0,0 +1,98 @@
+; ***************************************************************************
+; copyright   : (C) 2025 by Martin Preuss
+; email       : martin@libchipcard.de
+;
+; ***************************************************************************
+; * This file is part of the project "AqHome".                              *
+; * Please see toplevel file COPYING of that project for license details.   *
+; ***************************************************************************
+
+
+; ***************************************************************************
+;
+;                                 AtTiny84
+;                                 --------
+;                            VCC  1     14  GND
+;                            PB0  2     13  PA0
+;                            PB1  3     12  PA1  COM-DATA
+;                  /RESET    PB3  4     11  PA2
+;                            PB2  5     10  PA3  LED
+;                  COM_ATTN  PA7  6      9  PA4  TWI-SCL
+;                  TWI-SDA   PA6  7      8  PA5
+;                                 --------
+;
+; ***************************************************************************
+
+
+
+.equ BOOTLOADER_ADDR = 0xd00
+
+.equ FIRMWARE_VARIANT_BOOT        = 0
+.equ FIRMWARE_VARIANT_TEMP_WINDOW = 1
+
+.equ DEVICEINFO_ID       = 'N'
+.equ DEVICEINFO_VERSION  = 26
+.equ DEVICEINFO_REVISION = 0
+
+
+
+; ---------------------------------------------------------------------------
+; LED module
+
+.equ LED_SIMPLE_ONTIME  = 1     ; shorter
+.equ LED_SIMPLE_OFFTIME = 50    ; longer
+.equ LED_SIMPLE_DDR     = DDRA
+.equ LED_SIMPLE_PORT    = PORTA
+.equ LED_SIMPLE_PORTIN  = PINA
+.equ LED_SIMPLE_PINNUM  = PORTA3
+
+
+
+; ---------------------------------------------------------------------------
+; COM module
+
+.equ COM_BIT_LENGTH      = 52000 ; 104000ns=9600, 52000ns=19200, 26000ns=38400
+.equ COM_HALFBIT_LENGTH  = 26000 ; see https://de.wikipedia.org/wiki/Universal_Asynchronous_Receiver_Transmitter
+
+.equ COM_DATA_DDR       = DDRA
+.equ COM_DATA_INPUT     = PINA
+.equ COM_DATA_OUTPUT    = PORTA
+.equ COM_DATA_PIN       = PORTA1
+
+.equ COM_ATTN_DDR       = DDRA
+.equ COM_ATTN_INPUT     = PINA
+.equ COM_ATTN_OUTPUT    = PORTA
+.equ COM_ATTN_PIN       = PORTA7
+
+.equ COM_IRQ_ADDR_ATTN   = PCMSK0
+.equ COM_IRQ_BIT_ATTN    = PCINT7        ; bit 7 in PCMSK0
+.equ COM_IRQ_GIFR_ATTN   = PCIF0
+.equ COM_IRQ_GIMSK_ATTN  = PCIE0
+
+
+
+; ---------------------------------------------------------------------------
+; TWI master module
+
+;.equ TWI_BIT_LENGTH = 10000 ; 100000 and 200000 works for display: 10000, 100000, 200000
+.equ TWI_BIT_LENGTH = 1 ; 10, 100, 500, 100000 and 200000 works for display: 10000, 100000, 200000
+
+.equ TWI_DDR_SCL          = DDRA
+.equ TWI_PORT_SCL         = PORTA
+.equ TWI_PIN_SCL          = PINA
+.equ TWI_PINNUM_SCL       = PORTA4
+
+.equ TWI_DDR_SDA          = DDRA
+.equ TWI_PORT_SDA         = PORTA
+.equ TWI_PIN_SDA          = PINA
+.equ TWI_PINNUM_SDA       = PORTA6
+
+
+
+; ---------------------------------------------------------------------------
+; SGB 30
+
+.equ SGP30_ADDR           = 0x58
+
+
+

avr/devices/n26/main/0BUILD

@@ -0,0 +1,34 @@
+<?xml?>
+
+<gwbuild>
+
+  <target type="AvrHexFile" name="n26_firmware" >
+
+    <includes type="avrasm" >
+      -I $(builddir)
+      -I $(srcdir)
+      -I $(topsrcdir)/avr
+      -I $(topbuilddir)/avr
+    </includes>
+
+
+    <sources type="avrasm" >
+      main.asm
+    </sources>
+
+
+  </target>
+
+
+
+  <subdirs>
+  </subdirs>
+
+  <extradist>
+    data.asm
+  </extradist>
+  
+
+</gwbuild>
+
+

avr/devices/n26/main/data.asm

@@ -0,0 +1,14 @@
+; ***************************************************************************
+; copyright   : (C) 2025 by Martin Preuss
+; email       : martin@libchipcard.de
+;
+; ***************************************************************************
+; * This file is part of the project "AqHome".                              *
+; * Please see toplevel file COPYING of that project for license details.   *
+; ***************************************************************************
+
+
+
+.dseg
+
+

avr/devices/n26/main/main.asm

@@ -0,0 +1,210 @@
+; ***************************************************************************
+; copyright   : (C) 2025 by Martin Preuss
+; email       : martin@libchipcard.de
+;
+; ***************************************************************************
+; * This file is part of the project "AqHome".                              *
+; * Please see toplevel file COPYING of that project for license details.   *
+; ***************************************************************************
+
+
+
+
+; ***************************************************************************
+; Source file for temperature sensor node on AtTiny 84
+;
+; This is for the full system (i.e. not the boot loader).
+;
+; All definitions and changes should go into this file.
+;
+;
+; ***************************************************************************
+
+
+.equ clock=1000000 ; Define the clock frequency
+;.equ clock=8000000 ; Define the clock frequency
+
+
+
+.nolist
+.include "include/tn84def.inc" ; Define device ATtiny84
+.list
+
+.include "../defs.asm"
+.include "./data.asm"
+
+.include "version.asm"
+.include "devices/all/defs.asm"
+.include "common/calls.asm"
+.include "common/utils_wait.asm"
+
+
+
+; ***************************************************************************
+; defines
+
+; ---------------------------------------------------------------------------
+; generic
+
+.equ NET_BUFFERS_NUM            = 6
+.equ NET_BUFFERS_SIZE           = 32
+
+.equ PROGRAM_SENSOR_INTERVAL_SECS = 60
+.equ PROGRAM_STATS_INTERVAL_MINS = 10
+
+
+
+; ---------------------------------------------------------------------------
+; firmware settings including list of modules used
+
+; #define MODULES_TIMER
+#define MODULES_CLOCK
+#define MODULES_LED_SIMPLE
+#define MODULES_NETWORK
+#define MODULES_UART_BITBANG
+#define MODULES_TWI_MASTER
+;#define MODULES_LCD
+;#define LCD_MINIMAL_FONT
+;#define MODULES_SI7021
+#define MODULES_SGP30
+;#define MODULES_SGP40
+;#define MODULES_STATS
+;#define MODULES_OWI_MASTER
+;#define MODULES_DS18B20
+;#define MODULES_MOTION
+;#define MODULES_CCS811
+
+#define APPS_NETWORK
+;#define APPS_MOTION
+#define APPS_REPORTSENSORS
+#define APPS_STATS
+
+
+
+; ---------------------------------------------------------------------------
+; defines for values
+
+.equ VALUE_ID_SGP30_TVOC       = 0x09
+.equ VALUE_ID_SGP30_CO2        = 0x0a
+
+.equ VALUE_ID_DEBUG            = 0x7f
+
+.equ VALUE_ID_LEDSIMPLE_TIMING = 0x88
+
+
+
+
+
+; ***************************************************************************
+; code segment
+
+.cseg
+.org 000000
+
+
+
+; ---------------------------------------------------------------------------
+; Reset and interrupt vectors (will be removed as soon as we can flash data over COM)
+
+;	rjmp main ; Reset vector
+        rjmp BOOTLOADER_ADDR ; Reset vector  ; use this for flashed system
+	reti ; EXT_INT0
+	rjmp UART_BitBang_PcintIsr ; PCI0
+	reti ; PCI1
+	reti ; WATCHDOG
+	reti ; ICP1
+	reti ; OC1A
+	reti ; OC1B
+	reti ; OVF1
+        rjmp baseTimerIrqOC0A ; OC0A
+	reti ; OC0B
+	reti ; OVF0
+	reti ; ACI
+        reti ; ADCC
+	reti ; ERDY
+	reti ; USI_STR
+	reti ; USI_OVF
+
+
+devInfoBlock:        ; 12 bytes
+devInfoManufacturer: .db 'A', 'Q', 'U', 'A'
+devInfoId:           .db DEVICEINFO_ID, 0
+devInfoVersion:      .db DEVICEINFO_VERSION, DEVICEINFO_REVISION             ; version, revision
+firmwareVersion:     .db FIRMWARE_VARIANT_TEMP_WINDOW, FIRMWARE_VERSION_MAJOR
+                     .db FIRMWARE_VERSION_MINOR, FIRMWARE_VERSION_PATCHLEVEL
+
+
+
+; ---------------------------------------------------------------------------
+; @routine firmwareStart @global
+
+firmwareStart:
+  rjmp main
+; @end
+
+
+
+; ---------------------------------------------------------------------------
+; @routine onSystemStart
+
+onSystemStart:
+  ret
+; @end
+
+
+
+; ---------------------------------------------------------------------------
+; @routine onMessageReceived
+;
+; Called on every message received
+
+onMessageReceived:
+  clc
+  ret
+; @end
+
+
+
+; ---------------------------------------------------------------------------
+; @routine onEvery100ms
+;
+; Called every 100ms. Add your routine calls here. No arguments, no results.
+
+onEvery100ms:
+onEverySecond:
+onEveryMinute:
+onEveryHour:
+onEveryDay:
+  ret
+; @end
+
+
+
+; ---------------------------------------------------------------------------
+; @routine onEveryLoop
+;
+; Called on every loop (i.e. after awakening from sleep).
+;
+onEveryLoop:
+  ret
+; @end
+
+
+
+
+
+; ***************************************************************************
+; includes
+
+.include "devices/all/hw_tn84.asm"
+.include "devices/all/includes.asm"
+
+
+
+; ---------------------------------------------------------------------------
+; defines for network interface
+
+.equ netInterfaceData = uart_bitbang_iface
+
+
+

avr/version.asm

@@ -11,5 +11,5 @@
 
 .equ FIRMWARE_VERSION_MAJOR       = 1
 .equ FIRMWARE_VERSION_MINOR       = 0
-.equ FIRMWARE_VERSION_PATCHLEVEL  = 3
+.equ FIRMWARE_VERSION_PATCHLEVEL  = 4
 

devices/nodes/0BUILD

@@ -5,14 +5,12 @@
     aqua_n06.xml
     aqua_n11.xml
     aqua_n12.xml
-    aqua_n14.xml
     aqua_n15.xml
     aqua_n16.xml
     aqua_n17.xml
     aqua_n18.xml
     aqua_n19.xml
     aqua_n20.xml
-    aqua_n21.xml
     aqua_n22.xml
     aqua_t03.xml
   </data>

devices/nodes/aqua_n14.xml

@@ -1,19 +0,0 @@
-
-<device name="aqua_n14" driver="nodes">
-  <manufacturer>AQUA</manufacturer>
-  <devicetype>N</devicetype>
-  <deviceversion>14</deviceversion>
-  
-  <values>
-    <value name="DS18B20_TEMP" id="0x06" type="sensor" dataType="rational" modality="temperature" units="C" denom="16" />
-
-    <value name="NUMLEDS"      id="0x82" type="actor"  dataType="int" />
-    <value name="RGBWVALUE"    id="0x83" type="actor"  dataType="dword" />
-
-    <value name="MALRGBWVALUE" id="0x84" type="actor"  dataType="dword" />
-    <value name="MALONTIME"    id="0x85" type="actor"  dataType="uint16" />
-    <value name="MALSOURCE1"   id="0x86" type="actor"  dataType="uint16" />
-    <value name="MALSOURCE2"   id="0x87" type="actor"  dataType="uint16" />
-  </values>
-
-</device>

flashnode.sh

@@ -23,6 +23,13 @@ case $NODE in
        EFUSE_ARG="-U efuse:w:0xFF:m"
        FILE_ARG="-U flash:w:./0-build/avr/devices/c02/boot/c02_boot.hex"
        ;;
+  n14)
+       DEVICE_ARG="-p t85"
+       HFUSE_ARG="-U hfuse:w:0xD7:m"
+       LFUSE_ARG=""
+       EFUSE_ARG="-U efuse:w:0xFE:m"
+       FILE_ARG="-U flash:w:./0-build/avr/devices/n14/boot/n14_boot.hex"
+       ;;
   n16)
        DEVICE_ARG="-p t84"
        HFUSE_ARG="-U hfuse:w:0xD7:m"