avr: added n14 back in.

avr/devices/0BUILD

@@ -26,6 +26,7 @@
     all
     c01
     c02
+    n14
     n16
     n19
     n20
@@ -34,6 +35,7 @@
     n23
     n24
     n25
+    n26
     t03
   </subdirs>
 

avr/devices/n14/0BUILD

@@ -2,51 +2,21 @@
 
 <gwbuild>
 
-  <target type="AvrHexFile" name="n14_main" >
-
-    <includes type="avrasm" >
-      -I $(builddir)
-      -I $(srcdir)
-      -I $(topsrcdir)/avr
-      -I $(topbuilddir)/avr
-    </includes>
-
-
-    <sources type="avrasm" >
-      n14_main.asm
-    </sources>
-
-
-  </target>
-
-
-
-  <target type="AvrHexFile" name="n14_boot" >
-
-    <includes type="avrasm" >
-      -I $(builddir)
-      -I $(srcdir)
-      -I $(topsrcdir)/avr
-      -I $(topbuilddir)/avr
-    </includes>
-
-
-    <sources type="avrasm" >
-      n14_boot.asm
-    </sources>
-
-
-  </target>
-
-
   <subdirs>
+    boot
+    main
   </subdirs>
 
+  <data dist="true" install="$(datadir)/aqhome/devices/nodes">
+    aqua_n14.xml
+  </data>
+
+
   <extradist>
-    n14_defs.asm
+    defs.asm
+    README
   </extradist>
   
 
 </gwbuild>
 
-

avr/devices/n14/README

@@ -0,0 +1,14 @@
+
+N14
+===
+
+- Role: LED strip controller
+- MCU: AtTiny85
+- Connection: RJ45
+- UART: uart_bitbang2
+- Periphery:
+  - LED strip connection (SK6812)
+  - OWI interface
+    - DS18B20 temperature sensor
+- Modules:
+  - MA_LIGHT: motion activated light

avr/devices/n14/aqua_n14.xml

@@ -0,0 +1,29 @@
+
+<device name="aqua_n14" driver="nodes">
+  <manufacturer>AQUA</manufacturer>
+  <devicetype>N</devicetype>
+  <deviceversion>14</deviceversion>
+  
+  <values>
+    <value name="DS18B20_TEMP" id="0x06" type="sensor" dataType="rational" modality="temperature" units="C" denom="16" />
+
+    <value name="NUMLEDS"      id="0x82" type="actor"  dataType="int" />
+    <value name="RGBWVALUE"    id="0x83" type="actor"  dataType="dword" />
+
+    <value name="MALRGBWVALUE" id="0x84" type="actor"  dataType="dword" />
+    <value name="MALONTIME"    id="0x85" type="actor"  dataType="uint16" />
+    <value name="MALSOURCE1"   id="0x86" type="actor"  dataType="uint16" />
+    <value name="MALSOURCE2"   id="0x87" type="actor"  dataType="uint16" />
+
+    <value name="stats_packets_in"       id="0xe0" type="sensor" dataType="uint16" denom="1" />
+    <value name="stats_packets_out"      id="0xe1" type="sensor" dataType="uint16" denom="1" />
+    <value name="stats_content_errors"   id="0xe2" type="sensor" dataType="uint16" denom="1" />
+    <value name="stats_io_errors"        id="0xe3" type="sensor" dataType="uint16" denom="1" />
+    <value name="stats_nobuf_errors"     id="0xe4" type="sensor" dataType="uint16" denom="1" />
+    <value name="stats_collision_errors" id="0xe5" type="sensor" dataType="uint16" denom="1" />
+    <value name="stats_busy_errors"      id="0xe6" type="sensor" dataType="uint16" denom="1" />
+
+    <value name="LEDTIMING"    id="0x88" type="actor"  dataType="uint16" />
+  </values>
+
+</device>

avr/devices/n14/boot/0BUILD

@@ -0,0 +1,32 @@
+<?xml?>
+
+<gwbuild>
+
+  <target type="AvrHexFile" name="n14_boot" >
+
+    <includes type="avrasm" >
+      -I $(builddir)
+      -I $(srcdir)
+      -I $(topsrcdir)/avr
+      -I $(topbuilddir)/avr
+    </includes>
+
+
+    <sources type="avrasm" >
+      boot.asm
+    </sources>
+
+
+  </target>
+
+
+  <subdirs>
+  </subdirs>
+
+  <extradist>
+  </extradist>
+  
+
+</gwbuild>
+
+

avr/devices/n14/boot/boot.asm

@@ -14,30 +14,19 @@
 .include "include/tn85def.inc" ; Define device ATtiny85
 .list
 
-.include "n14_defs.asm"
+.include "version.asm"
-.include "defs_all.asm"
+.include "../defs.asm"
-
+.include "devices/all/defs.asm"
-
-#define COM_ACCEPT_ALL_DEST
-
-
-; ***************************************************************************
-; defines
-
-; ---------------------------------------------------------------------------
-; generic
 
+.include "common/calls.asm"
 .include "common/utils_wait.asm"
 .include "modules/com2/defs.asm"
 .include "modules/comproto/defs.asm"
 
 
-; ---------------------------------------------------------------------------
-; firmware settings
 
-.equ FIRMWARE_VERSION_MAJOR       = 0
+; ***************************************************************************
-.equ FIRMWARE_VERSION_MINOR       = 0
+; defines
-.equ FIRMWARE_VERSION_PATCHLEVEL  = 1
 
 
 ; ---------------------------------------------------------------------------
@@ -95,8 +84,7 @@ firmwareStart:   rjmp main ; will be overwritten when flashing
 
 
 main:
-  rjmp bootLoader ; this routine is in modules/flash/proto.asm
+  rjmp bootLoader ; this routine is in modules/bootloader/main.asm
-
 
 
 
@@ -112,6 +100,7 @@ main:
 .include "modules/flash/io.asm"
 .include "modules/flash/io_attn.asm"
 .include "modules/flash/io_bitbang.asm"
+.include "modules/flash/flashxp.asm"
 .include "modules/flash/flash1p.asm"
 .include "modules/flash/flashprocess.asm"
 .include "modules/flash/wait.asm"
@@ -138,72 +127,3 @@ systemSetSpeed:
   ret
 
 
-
-DEBUG1:
-  ldi r19, 50
-  ldi r20, 1
-  ldi r21, 9
-  rcall blinkLed
-  rjmp DEBUG1
-
-
-DEBUG2:
-  ldi r19, 50
-  ldi r20, 1
-  ldi r21, 1
-  rcall blinkLed
-  rjmp DEBUG2
-
-
-
-; @param r19 loop count
-; @param r20 on time
-; @param r21 off time
-; @clobbers (R16, R18, R22, R24, R25)
-
-blinkLed:
-    cbi LED_SIMPLE_PORT, LED_SIMPLE_PINNUM  ; on
-    mov r22, r20
-    rcall waitForMultiple100ms              ; (R252
-    sbi LED_SIMPLE_PORT, LED_SIMPLE_PINNUM  ; off
-    mov r22, r21
-    rcall waitForMultiple100ms              ; (R22)
-    dec r19
-  brne blinkLed  
-  ret
-
-
-; @param r22 number of 100ms periods to wait
-waitForMultiple100ms:
-waitForMultiple100ms_loop:
-    push r22
-      rcall waitFor100ms
-    pop r22
-    dec r22
-  brne waitForMultiple100ms_loop
-  ret
-
-
-waitFor100ms:
-  ldi r22, 10
-waitFor100ms_loop:
-    push r22
-      rcall waitFor10ms
-    pop r22
-    dec r22
-  brne waitFor100ms_loop
-  ret
-
-waitFor10ms:
-  ldi r22, 100
-waitFor10ms_loop:
-    push r22
-      rcall Utils_WaitFor100MicroSecs
-    pop r22
-    dec r22
-  brne waitFor10ms_loop
-  ret
-
-
-
-

avr/devices/n14/defs.asm

@@ -1,5 +1,5 @@
 ; ***************************************************************************
-; copyright   : (C) 2024 by Martin Preuss
+; copyright   : (C) 2025 by Martin Preuss
 ; email       : martin@libchipcard.de
 ;
 ; ***************************************************************************
@@ -39,6 +39,7 @@
 .equ LED_SIMPLE_OFFTIME = 30
 .equ LED_SIMPLE_DDR     = DDRB
 .equ LED_SIMPLE_PORT    = PORTB
+.equ LED_SIMPLE_PORTIN  = PINB
 .equ LED_SIMPLE_PINNUM  = PORTB4
 
 

avr/devices/n14/main/0BUILD

@@ -0,0 +1,33 @@
+<?xml?>
+
+<gwbuild>
+
+  <target type="AvrHexFile" name="n14_firmware" >
+
+    <includes type="avrasm" >
+      -I $(builddir)
+      -I $(srcdir)
+      -I $(topsrcdir)/avr
+      -I $(topbuilddir)/avr
+    </includes>
+
+
+    <sources type="avrasm" >
+      main.asm
+    </sources>
+
+
+  </target>
+
+
+
+  <subdirs>
+  </subdirs>
+
+  <extradist>
+  </extradist>
+  
+
+</gwbuild>
+
+

avr/devices/n14/main/main.asm

@@ -0,0 +1,208 @@
+; ***************************************************************************
+; copyright   : (C) 2024 by Martin Preuss
+; email       : martin@libchipcard.de
+;
+; ***************************************************************************
+; * This file is part of the project "AqHome".                              *
+; * Please see toplevel file COPYING of that project for license details.   *
+; ***************************************************************************
+
+
+; ***************************************************************************
+; Source file for LED controller node on AtTiny 85
+;
+; This is for the full system (i.e. not the boot loader).
+; ***************************************************************************
+
+.equ clock=8000000 ; Define the clock frequency
+
+
+
+.nolist
+.include "include/tn85def.inc" ; Define device ATtiny85
+.list
+
+.include "version.asm"
+.include "../defs.asm"
+;.include "./data.asm"
+
+.include "devices/all/defs.asm"
+
+.include "common/calls.asm"
+.include "common/utils_wait.asm"
+
+
+
+; ***************************************************************************
+; defines
+
+; ---------------------------------------------------------------------------
+; generic
+
+.equ NET_BUFFERS_NUM            = 6
+.equ NET_BUFFERS_SIZE           = 32
+
+
+
+; ---------------------------------------------------------------------------
+; firmware settings including list of modules used
+
+#define MODULES_CLOCK
+#define MODULES_LED_SIMPLE
+#define MODULES_NETWORK
+#define MODULES_UART_BITBANG
+#define MODULES_OWI_MASTER
+#define MODULES_DS18B20
+#define MODULES_SK6812
+;#define MODULES_MOTION_LIGHT
+
+#define APPS_NETWORK
+#define APPS_REPORTSENSORS
+#define APPS_STATS
+#define APPS_MA_LIGHT
+
+
+
+; ---------------------------------------------------------------------------
+; defines for modules
+
+;.equ VALUE_ID_SI7021_TEMP    = 0x01
+;.equ VALUE_ID_SI7021_HUM     = 0x02
+
+;.equ VALUE_ID_ADC            = 0x03
+;.equ VALUE_ID_REED1          = 0x04
+;.equ VALUE_ID_REED2          = 0x05
+.equ VALUE_ID_DS18B20_TEMP    = 0x06
+
+;.equ VALUE_ID_REED_CONF      = 0x81
+.equ VALUE_ID_LED_NUMLEDS      = 0x82
+.equ VALUE_ID_LED_RGBW_VALUE   = 0x83
+.equ VALUE_ID_MAL_RGBW_VALUE   = 0x84
+.equ VALUE_ID_MAL_ONTIME       = 0x85
+.equ VALUE_ID_MAL_SOURCE1      = 0x86
+.equ VALUE_ID_MAL_SOURCE2      = 0x87
+
+.equ VALUE_ID_LEDSIMPLE_TIMING = 0x88
+
+
+; ***************************************************************************
+; code segment
+
+.cseg
+.org 000000
+
+
+
+; ---------------------------------------------------------------------------
+; Reset and interrupt vectors
+
+        rjmp BOOTLOADER_ADDR ; Reset vector  ; use this for flashed system
+	reti ; EXT_INT0
+	rjmp UART_BitBang_PcintIsr ; PCI0
+	reti ; OC1A
+	reti ; OVF1
+	reti ; OVF0
+	reti ; ERDY
+	reti ; ACI
+        reti ; ADCC
+	reti ; OC1B
+        rjmp baseTimerIrqOC0A ; OC0A
+	reti ; OC0B
+	reti ; WATCHDOG
+	reti ; USI_STR
+	reti ; USI_OVF
+
+
+devInfoBlock:        ; 12 bytes
+devInfoManufacturer: .db 'A', 'Q', 'U', 'A'
+devInfoId:           .db DEVICEINFO_ID, 0
+devInfoVersion:      .db DEVICEINFO_VERSION, DEVICEINFO_REVISION             ; version, revision
+firmwareVersion:     .db FIRMWARE_VARIANT_LEDSTRIPS, FIRMWARE_VERSION_MAJOR
+                     .db FIRMWARE_VERSION_MINOR, FIRMWARE_VERSION_PATCHLEVEL
+
+; ---------------------------------------------------------------------------
+; @routine firmwareStart @global
+
+firmwareStart:
+  rjmp main
+; @end
+
+
+
+; ---------------------------------------------------------------------------
+; @routine onSystemStart
+
+onSystemStart:
+  ret
+; @end
+
+
+
+; ---------------------------------------------------------------------------
+; @routine onMessageReceived
+;
+; Called on every message received
+
+onMessageReceived:
+  clc
+  ret
+; @end
+
+
+
+; ---------------------------------------------------------------------------
+; @routine onEvery100ms
+;
+; Called every 100ms. Add your routine calls here. No arguments, no results.
+
+onEvery100ms:
+onEveryMinute:
+onEveryHour:
+onEveryDay:
+  ret
+; @end
+
+onEverySecond:
+  ret
+  ; debug
+  ldi r19, 0x00           ; G
+  ldi r18, 0xff           ; R
+  ldi r20, 0x55           ; B
+  ldi r21, 0xaa           ; W
+  rcall SK6812_SetAllColor ; r23 (r16, r17)
+  ret
+
+
+
+; ---------------------------------------------------------------------------
+; @routine onEveryLoop
+;
+; Called on every loop (i.e. after awakening from sleep).
+;
+onEveryLoop:
+  ret
+; @end
+
+
+
+
+
+; ***************************************************************************
+; includes
+
+.include "devices/all/hw_tn85.asm"
+.include "devices/all/includes.asm"
+.include "common/debug.asm"
+
+
+
+; ---------------------------------------------------------------------------
+; defines for network interface
+
+.equ netInterfaceData = uart_bitbang_iface
+
+
+
+
+
+

avr/devices/n14/n14_main.asm

@@ -1,333 +0,0 @@
-; ***************************************************************************
-; copyright   : (C) 2024 by Martin Preuss
-; email       : martin@libchipcard.de
-;
-; ***************************************************************************
-; * This file is part of the project "AqHome".                              *
-; * Please see toplevel file COPYING of that project for license details.   *
-; ***************************************************************************
-
-
-; ***************************************************************************
-; Source file for LED controller node on AtTiny 85
-;
-; This is for the full system (i.e. not the boot loader).
-; ***************************************************************************
-
-.equ clock=8000000 ; Define the clock frequency
-
-
-
-.nolist
-.include "include/tn85def.inc" ; Define device ATtiny85
-.list
-
-.include "n14_defs.asm"
-.include "defs_all.asm"
-.include "common/utils_wait.asm" ; wait macro
-
-
-
-; ***************************************************************************
-; defines
-
-; ---------------------------------------------------------------------------
-; firmware settings including list of modules used
-
-.equ FIRMWARE_VERSION_MAJOR       = 0
-.equ FIRMWARE_VERSION_MINOR       = 0
-.equ FIRMWARE_VERSION_PATCHLEVEL  = 1
-
-
-#define MODULES_TIMER
-#define MODULES_COM
-#define MODULES_COM_WITH_ADDR_PROTO
-#define MODULES_LED_SIMPLE
-#define MODULES_STATS
-#define MODULES_OWI_MASTER
-#define MODULES_DS18B20
-#define MODULES_SK6812
-#define MODULES_MOTION_LIGHT
-
-; #define COM_ACCEPT_ALL_DEST
-
-
-
-; ---------------------------------------------------------------------------
-; defines for modules
-
-;.equ VALUE_ID_SI7021_TEMP    = 0x01
-;.equ VALUE_ID_SI7021_HUM     = 0x02
-
-;.equ VALUE_ID_ADC            = 0x03
-;.equ VALUE_ID_REED1          = 0x04
-;.equ VALUE_ID_REED2          = 0x05
-.equ VALUE_ID_DS18B20_TEMP    = 0x06
-
-;.equ VALUE_ID_REED_CONF      = 0x81
-.equ VALUE_ID_LED_NUMLEDS    = 0x82
-.equ VALUE_ID_LED_RGBW_VALUE = 0x83
-.equ VALUE_ID_MAL_RGBW_VALUE = 0x84
-.equ VALUE_ID_MAL_ONTIME     = 0x85
-.equ VALUE_ID_MAL_SOURCE1    = 0x86
-.equ VALUE_ID_MAL_SOURCE2    = 0x87
-
-
-; ***************************************************************************
-; code segment
-
-.cseg
-.org 000000
-
-
-
-; ---------------------------------------------------------------------------
-; Reset and interrupt vectors
-
-        rjmp BOOTLOADER_ADDR ; Reset vector  ; use this for flashed system
-	reti ; EXT_INT0
-	rjmp uartBitbangIsrPcint0 ; PCI0
-	reti ; OC1A
-	reti ; OVF1
-	reti ; OVF0
-	reti ; ERDY
-	reti ; ACI
-        reti ; ADCC
-	reti ; OC1B
-        rjmp baseTimerIrqOC0A ; OC0A
-	reti ; OC0B
-	reti ; WATCHDOG
-	reti ; USI_STR
-	reti ; USI_OVF
-
-	
-devInfoBlock:        ; 12 bytes
-devInfoManufacturer: .db 'A', 'Q', 'U', 'A'
-devInfoId:           .db DEVICEINFO_ID, 0
-devInfoVersion:      .db DEVICEINFO_VERSION, DEVICEINFO_REVISION             ; version, revision
-firmwareVersion:     .db FIRMWARE_VARIANT_LEDSTRIPS, FIRMWARE_VERSION_MAJOR
-                     .db FIRMWARE_VERSION_MINOR, FIRMWARE_VERSION_PATCHLEVEL
-
-firmwareStart:   rjmp main
-
-
-; ***************************************************************************
-; includes
-
-.include "common/utils.asm"
-.include "common/utils_wait_fixed.asm"
-.include "common/utils_copy_from_flash.asm"
-.include "common/utils_copy_sdram.asm"
-.include "common/crc8.asm"
-
-.include "modules/basetimer/main.asm"
-
-#ifdef MODULES_TIMER
-  .include "modules/timer/main.asm"
-#endif
-#ifdef MODULES_LED_SIMPLE
-.include "modules/led_simple/main.asm"
-#endif
-#ifdef MODULES_COM
-  .include "modules/com2/defs.asm"
-  .include "modules/com2/main.asm"
-  .include "modules/com2/buffer.asm"
-  #ifdef MODULES_STATS
-    .include "modules/comproto/msg_recvstats.asm"
-    .include "modules/comproto/msg_sendstats.asm"
-    .include "modules/comproto/msg_sysstats.asm"
-    .include "modules/comproto/msg_memstats.asm"
-  #endif
-  .include "modules/comproto/msg_pong.asm"
-  .include "modules/comproto/msg_value.asm"
-  .include "modules/comproto/msg_device.asm"
-  .include "modules/comproto/msg_reboot.asm"
-  .include "modules/uart_bitbang/defs.asm"
-  .include "modules/uart_bitbang/main.asm"
-  .include "modules/uart_bitbang/bytelevel.asm"
-  .include "modules/uart_bitbang/packetlevel.asm"
-  #ifdef MODULES_COM_WITH_ADDR_PROTO
-    .include "modules/comproto/defs.asm"
-    .include "modules/comproto/main.asm"
-    .include "modules/comproto/addr.asm"
-  #endif
-#endif
-#ifdef MODULES_STATS
-  .include "modules/stats/main.asm"
-#endif
-#ifdef MODULES_OWI_MASTER
-  .include "modules/owimaster/main.asm"
-#endif
-#ifdef MODULES_DS18B20
-  .include "modules/ds18b20/main.asm"
-#endif
-#ifdef MODULES_SK6812
-  .include "modules/sk6812/main.asm"
-#endif
-#ifdef MODULES_MOTION_LIGHT
-  .include "modules/ma_light/main.asm"
-#endif
-
-
-; ***************************************************************************
-; data in SRAM
-
-.dseg
-
-
-#ifdef MODULES_DS18B20
-  sramDs18b20Timer:            .byte 2
-  sramSendDs18b20TempTimer:    .byte 2
-#endif
-
-
-; ***************************************************************************
-; data in FLASH
-
-.cseg
-
-
-
-; ---------------------------------------------------------------------------
-; timer list
-
-
-timerList:
-;     SRAM variable/counter        routine                     flags                secs (0=don't start or restart)
-#ifdef MODULES_COM_WITH_ADDR_PROTO
-  .dw cproAddresModeTimer,         CPRO_Address_OnTimer,       0,                   0     ; (no restart)
-#endif
-#ifdef MODULES_STATS
-  .dw statsSendTimer,              Stats_Timer,                TIMER_FLAGS_IF_ADDR, 9000   ; every 15m
-#endif
-#ifdef MODULES_DS18B20
-  .dw sramDs18b20Timer,            Ds18b20_OnTimer,            0,                   300    ; every 30s
-  .dw sramSendDs18b20TempTimer,    sendDs18b20Temp,            TIMER_FLAGS_IF_ADDR, 600    ; every 60s
-#endif
-  .dw 0 ; end of list
-
-
-
-
-
-.include "main_all.asm"
-
-
-; ---------------------------------------------------------------------------
-; Called early on system startup. No arguments, no results.
-
-systemSetSpeed:
-.if clock == 1000000
-  ldi r16, (1<<CLKPCE)
-  ldi r17, (1<<CLKPS1) | (1<<CLKPS0)
-  out CLKPR, r16
-  out CLKPR, r17
-.endif
-
-.if clock == 8000000
-  ldi r16, (1<<CLKPCE)
-  ldi r17, 0
-  out CLKPR, r16
-  out CLKPR, r17
-.endif
-  ret
-
-
-
-; ---------------------------------------------------------------------------
-; Called just before rebooting to bootloader. No arguments, no results.
-
-systemSetBootSpeed:
-  ldi r16, (1<<CLKPCE)
-  ldi r17, (1<<CLKPS1) | (1<<CLKPS0)
-  out CLKPR, r16
-  out CLKPR, r17
-  ret
-
-
-
-; ---------------------------------------------------------------------------
-; Called on first time run, i.e. on system start. No arguments, no results.
-
-onSystemStart:
-  ret
-
-
-#ifdef MODULES_DS18B20
-sendDs18b20Temp:
-  rcall Ds18b20_SendTemp
-  brcs sendDs18b20Temp_okay
-  ; set timer to 1s to retry later
-  ldi xl, LOW(sramSendDs18b20TempTimer)
-  ldi xh, HIGH(sramSendDs18b20TempTimer)
-  rjmp Timer_SetValueTo1s
-sendDs18b20Temp_okay:
-  ret
-#endif
-
-
-
-; ---------------------------------------------------------------------------
-; Called every 100ms. Add your routine calls here. No arguments, no results.
-
-onEvery100ms:
-#ifdef MODULES_LED_SIMPLE
-  rcall LedSimple_Every100ms
-#endif
-
-#ifdef MODULES_REED
-  rcall REED_Every100ms
-#endif
-
-#ifdef MODULES_MOTION_LIGHT
-  rcall MotionLight_Every100ms
-#endif
-
-  ret
-
-
-
-; ---------------------------------------------------------------------------
-; @routine onPacketReceived:
-;
-; Called after a packet was received via COM module. Add your routine calls here.
-;
-; The packet will be released in any case after return from this call.
-;
-; @return CFLAG set if message handled, cleared otherwise
-; @param X  pointer to received buffer
-; @clobbers all
-
-onPacketReceived:
-  ; get msg code
-  adiw xh:xl, COM2_MSG_OFFS_CMD
-  ld r16, x
-  sbiw xh:xl, COM2_MSG_OFFS_CMD
-
-#ifdef MODULES_MOTION_LIGHT
-  rcall MotionLight_OnPacketReceived
-  brcs onPacketReceived_end
-#endif
-
-#ifdef MODULES_SK6812
-  rcall SK6812_OnPacketReceived
-  brcs onPacketReceived_end
-#endif
-
-#ifdef MODULES_REED
-  rcall REED_OnPacketReceived
-  brcs onPacketReceived_end
-#endif
-
-#ifdef MODULES_COM
-  rcall CPRO_OnPacketReceived
-  brcs onPacketReceived_end
-#endif
-
-  clc
-onPacketReceived_end:
-  ret
-; @end
-
-
-