avr: split code in multiple files and routines.
This commit is contained in:
Martin Preuss
@@ -45,7 +45,7 @@
|
||||
|
||||
|
||||
; ---------------------------------------------------------------------------
|
||||
; firmware settings including list of modules used
|
||||
; firmware settings
|
||||
|
||||
#define FW_TYPE AQHOME_FW_TYPE_ATT84_BASE
|
||||
#define FW_VERSION 0x0001
|
||||
@@ -54,34 +54,6 @@
|
||||
#define BASE_SYSTEM
|
||||
#define WITH_FLASH
|
||||
|
||||
#define MODULES_TIMER
|
||||
#define MODULES_COM
|
||||
;#define MODULES_LED
|
||||
; #define MODULES_TWI_MASTER
|
||||
; #define MODULES_LCD
|
||||
; #define MODULES_SI7021
|
||||
|
||||
|
||||
.set MODULES_MASK = 0
|
||||
#ifdef MODULES_TIMER
|
||||
.set MODULES_MASK = MODULES_MASK | (1<<AQHOME_FW_MODULE_TIMER)
|
||||
#endif
|
||||
#ifdef MODULES_COM
|
||||
.set MODULES_MASK = MODULES_MASK | (1<<AQHOME_FW_MODULE_COM)
|
||||
#endif
|
||||
#ifdef MODULES_LED
|
||||
.set MODULES_MASK = MODULES_MASK | (1<<AQHOME_FW_MODULE_LED)
|
||||
#endif
|
||||
#ifdef MODULES_TWI_MASTER
|
||||
.set MODULES_MASK = MODULES_MASK | (1<<AQHOME_FW_MODULE_TWIMASTER)
|
||||
#endif
|
||||
#ifdef MODULES_LCD
|
||||
.set MODULES_MASK = MODULES_MASK | (1<<AQHOME_FW_MODULE_LCD)
|
||||
#endif
|
||||
#ifdef MODULES_SI7021
|
||||
.set MODULES_MASK = MODULES_MASK | (1<<AQHOME_FW_MODULE_SI7021)
|
||||
#endif
|
||||
|
||||
|
||||
|
||||
; ---------------------------------------------------------------------------
|
||||
@@ -138,7 +110,7 @@
|
||||
|
||||
firmwareType: .dw FW_TYPE
|
||||
firmwareVersion: .dw FW_VERSION
|
||||
firmwareModules: .dw MODULES_MASK
|
||||
firmwareModules: .dw 0
|
||||
firmwareStart: rjmp main ; will be overwritten when flashing
|
||||
|
||||
|
||||
@@ -151,7 +123,7 @@ firmwareStart: rjmp main ; will be overwritten when flashing
|
||||
|
||||
|
||||
main:
|
||||
rjmp bootLoader
|
||||
rjmp bootLoader ; this routine is in modules/flash/proto.asm
|
||||
|
||||
|
||||
|
||||
@@ -165,6 +137,13 @@ main:
|
||||
.include "common/crc8.asm"
|
||||
.include "modules/flash/main.asm"
|
||||
.include "modules/flash/proto.asm"
|
||||
.include "modules/flash/recv.asm"
|
||||
.include "modules/flash/send.asm"
|
||||
.include "modules/flash/wait.asm"
|
||||
.include "modules/flash/hdl_flash_start.asm"
|
||||
.include "modules/flash/hdl_flash_data.asm"
|
||||
.include "modules/flash/flash_rsp.asm"
|
||||
.include "modules/flash/flash_ready.asm"
|
||||
|
||||
|
||||
|
||||
|
||||
@@ -282,15 +282,15 @@ blinkPattern: .db 2, 50, 0xff, 0xff ; 1 short blink, 2s pause, restart
|
||||
|
||||
|
||||
timerList:
|
||||
; SRAM variable/counter routine flags secs (0=don't start or restart)
|
||||
; SRAM variable/counter routine flags secs (0=don't start or restart)
|
||||
#ifdef MODULES_COM_WITH_ADDR_PROTO
|
||||
.dw cproAddresModeTimer, CPRO_Address_OnTimer, 0, 0 ; (no restart)
|
||||
#endif
|
||||
#ifdef MODULES_STATS
|
||||
.dw statsSendTimer, Stats_Timer, TIMER_FLAGS_IF_ADDR, 30 ; every 30s
|
||||
.dw statsSendTimer, Stats_Timer, TIMER_FLAGS_IF_ADDR, 300 ; every 5m
|
||||
#endif
|
||||
#ifdef MODULES_LCD
|
||||
.dw sramPeriodicalLcdMark, periodicalLcdMark, 0, 1 ; every sec
|
||||
.dw sramPeriodicalLcdMark, periodicalLcdMark, 0, 1 ; every sec
|
||||
.dw sramTimerWriteStats, writeStats, 0, 10
|
||||
#endif
|
||||
#ifdef MODULES_SI7021
|
||||
|
||||
@@ -74,11 +74,11 @@ com2ReceivePacketRaw_error:
|
||||
; - x : ptr to buffer to send
|
||||
; OUT:
|
||||
; - CFLAGS: set if okay, cleared otherwise (errorcode in R16)
|
||||
; REGS: R15, R16, R22 (R17, R21, X)
|
||||
; REGS: R16, R22 (R17, R21, X)
|
||||
|
||||
COM2_SendPacketWithAttn:
|
||||
in r15, SREG
|
||||
push r15
|
||||
in r15, SREG
|
||||
cli
|
||||
Utils_WaitNanoSecs COM_BIT_LENGTH, 0, r22 ; wait for one bit duration
|
||||
; check for ATTN line: busy?
|
||||
@@ -103,8 +103,8 @@ COM2_SendPacketWithAttn:
|
||||
cbi COM_DDR_ATTN, COM_PINNUM_ATTN ; release ATTN line (by setting direction to IN)
|
||||
brcc COM2_SendPacketWithAttn_ioError
|
||||
; packet successfully sent
|
||||
out SREG, r15
|
||||
pop r15
|
||||
out SREG, r15
|
||||
sec
|
||||
ret
|
||||
|
||||
|
||||
23
avr/modules/flash/README
Normal file
23
avr/modules/flash/README
Normal file
@@ -0,0 +1,23 @@
|
||||
|
||||
This implements the boot loader. It can be used to flash new firmware to node.
|
||||
|
||||
|
||||
How it works
|
||||
============
|
||||
|
||||
|
||||
Whenever the MCU reboots the bootloader is started. The first thing it does is to send a FLASH_READY message to the bus
|
||||
containing its UID (if any) as well as type and version of the currently installed firmware.
|
||||
|
||||
If no FLASH_START message is received for the UID of the device then the bootloader tries to start the main firmware.
|
||||
|
||||
If a FLASH_START message is received from manager software (e.g. on a Linux machine) the MCU responds with a positive FLASH_RESPONSE
|
||||
message.
|
||||
After that the manager software sends FLASH_DATA messages to which the MCU responds with positive or negative FLASH_RESPONSE messages.
|
||||
The last flash page is followed by a FLASH_END message.
|
||||
Then the MCU tries to start the freshly installed firmware.
|
||||
|
||||
If at any point in the flashing process an unrecoverable error occurrs the bootloader is restarted, waiting again for a FLASH_START
|
||||
message.
|
||||
|
||||
|
||||
67
avr/modules/flash/flash_ready.asm
Normal file
67
avr/modules/flash/flash_ready.asm
Normal file
@@ -0,0 +1,67 @@
|
||||
; ***************************************************************************
|
||||
; copyright : (C) 2023 by Martin Preuss
|
||||
; email : martin@libchipcard.de
|
||||
;
|
||||
; ***************************************************************************
|
||||
; * This file is part of the project "AqHome". *
|
||||
; * Please see toplevel file COPYING of that project for license details. *
|
||||
; ***************************************************************************
|
||||
|
||||
|
||||
|
||||
; ***************************************************************************
|
||||
; code
|
||||
|
||||
|
||||
.cseg
|
||||
|
||||
|
||||
|
||||
; ---------------------------------------------------------------------------
|
||||
; Write a FLASH_READY packet.
|
||||
;
|
||||
; IN:
|
||||
; - X : buffer to write to
|
||||
; OUT:
|
||||
; - nothing
|
||||
; MODIFIED REGS: R16, Z (R17, R18, R19, R20)
|
||||
|
||||
flashWriteFlashReady:
|
||||
ldi r16, 0xff
|
||||
st X+, r16 ; dest address (unused)
|
||||
ldi r16, 12 ; msg code+src address+ten payload bytes
|
||||
st X+, r16 ; msg len
|
||||
ldi r16, CPRO_CMD_FLASH_READY
|
||||
st X+, r16 ; msg code
|
||||
ldi r16, COM2_MAINTENANCE_ADDR
|
||||
st X+, r16 ; src address (not used)
|
||||
; payload
|
||||
lds r16, flashUid
|
||||
st X+, r16
|
||||
lds r16, flashUid+1
|
||||
st X+, r16
|
||||
lds r16, flashUid+2
|
||||
st X+, r16
|
||||
lds r16, flashUid+3
|
||||
st X+, r16
|
||||
ldi zl, low(firmwareType*2)
|
||||
ldi zh, HIGH(firmwareType*2)
|
||||
lpm r16, Z+
|
||||
st X+, r16 ; firmwareType (low)
|
||||
lpm r16, Z+
|
||||
st X+, r16 ; firmwareType (high)
|
||||
lpm r16, Z+
|
||||
st X+, r16 ; firmwareVersion (low)
|
||||
lpm r16, Z+
|
||||
st X+, r16 ; firmwareVersion (high)
|
||||
ldi r16, LOW(PAGESIZE*2)
|
||||
st X+, r16
|
||||
ldi r16, HIGH(PAGESIZE*2)
|
||||
st X, r16
|
||||
sbiw xh:xl, 13
|
||||
rcall com2CalcAndAddChecksumByte ; (R16, R17, R18, R19, R20, X)
|
||||
sbiw xh:xl, 14
|
||||
ret
|
||||
|
||||
|
||||
|
||||
65
avr/modules/flash/flash_rsp.asm
Normal file
65
avr/modules/flash/flash_rsp.asm
Normal file
@@ -0,0 +1,65 @@
|
||||
; ***************************************************************************
|
||||
; copyright : (C) 2023 by Martin Preuss
|
||||
; email : martin@libchipcard.de
|
||||
;
|
||||
; ***************************************************************************
|
||||
; * This file is part of the project "AqHome". *
|
||||
; * Please see toplevel file COPYING of that project for license details. *
|
||||
; ***************************************************************************
|
||||
|
||||
|
||||
|
||||
; ***************************************************************************
|
||||
; code
|
||||
|
||||
|
||||
.cseg
|
||||
|
||||
|
||||
; ---------------------------------------------------------------------------
|
||||
; Create and send a FLASH RESPONSE packet
|
||||
;
|
||||
; IN:
|
||||
; - R16: response code to send
|
||||
; OUT:
|
||||
; - nothing
|
||||
; REGS: r16, X (R15, R17, R18, R19, R20, R21, R22)
|
||||
|
||||
flashSendFlashResponse:
|
||||
; send flash ready message
|
||||
ldi xl, LOW(flashSendBuffer)
|
||||
ldi xh, HIGH(flashSendBuffer)
|
||||
clr r16
|
||||
rcall flashWriteFlashRsp ; (R16, R17, R18, R19, R20)
|
||||
rjmp flashSendPacketUntilSuccess ; (R15, R16, R17, R21, R22, X)
|
||||
|
||||
|
||||
|
||||
|
||||
; ---------------------------------------------------------------------------
|
||||
; Write a FLASH_RESPONSE packet.
|
||||
;
|
||||
; IN:
|
||||
; - R16: response code (0 if ok, error code otherwise)
|
||||
; - X : buffer to write to
|
||||
; OUT:
|
||||
; - nothing
|
||||
; MODIFIED REGS: R16, R17 (R18, R19, R20)
|
||||
|
||||
flashWriteFlashRsp:
|
||||
clr r18
|
||||
st X+, r18 ; dest address (unused)
|
||||
ldi r18, 3 ; msg code+src address+one payload byte
|
||||
st X+, r18 ; msg len
|
||||
ldi r17, CPRO_CMD_FLASH_RSP
|
||||
st X+, r17 ; msg code
|
||||
clr r17
|
||||
st X+, r17 ; src address (not used)
|
||||
st X, r16 ; payload byte
|
||||
sbiw xh:xl, 4
|
||||
rcall com2CalcAndAddChecksumByte ; (R16, R17, R18, R19, R20, X)
|
||||
sbiw xh:xl, 5
|
||||
ret
|
||||
|
||||
|
||||
|
||||
62
avr/modules/flash/hdl_flash_data.asm
Normal file
62
avr/modules/flash/hdl_flash_data.asm
Normal file
@@ -0,0 +1,62 @@
|
||||
; ***************************************************************************
|
||||
; copyright : (C) 2023 by Martin Preuss
|
||||
; email : martin@libchipcard.de
|
||||
;
|
||||
; ***************************************************************************
|
||||
; * This file is part of the project "AqHome". *
|
||||
; * Please see toplevel file COPYING of that project for license details. *
|
||||
; ***************************************************************************
|
||||
|
||||
|
||||
|
||||
; ***************************************************************************
|
||||
; code
|
||||
|
||||
|
||||
.cseg
|
||||
|
||||
|
||||
|
||||
; ---------------------------------------------------------------------------
|
||||
; Handle FLASH DATA packet.
|
||||
;
|
||||
; IN:
|
||||
; - X : buffer containing the message
|
||||
; OUT:
|
||||
; - CFLAG: set if message is for us, cleared otherwise
|
||||
; REGS: R0, R1, R15, R16, R17, R18, R19, R20, R21, R24, R25, X, Z
|
||||
|
||||
flashHandleFlashData:
|
||||
adiw xh:xl, FLASH_MSG_OFFS_MSGLEN
|
||||
ld r18, X ; length (subtract 6
|
||||
cpi r18, 6 ; cmd(1), src(1), addr(4)
|
||||
brcs flashHandleFlashData_badData
|
||||
subi r18, 6 ; remaining length
|
||||
adiw xh:xl, FLASH_PACKET_DATA_OFFS_ADDR-FLASH_MSG_OFFS_MSGLEN
|
||||
ld zl, X+ ; address (low)
|
||||
ld zh, X+ ; address (high)
|
||||
adiw xh:xl, 2 ; ignore high bytes, points to first data byte now
|
||||
|
||||
; rcall Flash_StartPage ; (R0, R1, R16, R20, R24, R25)
|
||||
push zl
|
||||
push zh
|
||||
flashHandleFlashData_loop:
|
||||
ld r0, X+
|
||||
ld r1, X+
|
||||
rcall Flash_WriteIntoPage ; (R15, R16, Z+)
|
||||
subi r18, 2
|
||||
brne flashHandleFlashData_loop
|
||||
pop zh
|
||||
pop zl
|
||||
rcall Flash_FinishPage ; (R15, R16, R20)
|
||||
clr r16
|
||||
rjmp flashHandleFlashData_sendResponse
|
||||
flashHandleFlashData_badData:
|
||||
ldi r16, FLASH_ERROR_MSGERROR
|
||||
flashHandleFlashData_sendResponse:
|
||||
rcall flashSendFlashResponse ; (R15, R16, R17, R18, R19, R20, R21, R22, X)
|
||||
sec
|
||||
ret
|
||||
|
||||
|
||||
|
||||
58
avr/modules/flash/hdl_flash_start.asm
Normal file
58
avr/modules/flash/hdl_flash_start.asm
Normal file
@@ -0,0 +1,58 @@
|
||||
; ***************************************************************************
|
||||
; copyright : (C) 2023 by Martin Preuss
|
||||
; email : martin@libchipcard.de
|
||||
;
|
||||
; ***************************************************************************
|
||||
; * This file is part of the project "AqHome". *
|
||||
; * Please see toplevel file COPYING of that project for license details. *
|
||||
; ***************************************************************************
|
||||
|
||||
|
||||
|
||||
; ***************************************************************************
|
||||
; code
|
||||
|
||||
|
||||
.cseg
|
||||
|
||||
|
||||
|
||||
|
||||
; ---------------------------------------------------------------------------
|
||||
; Handle FLASH START packet.
|
||||
;
|
||||
; IN:
|
||||
; - X : buffer containing the message
|
||||
; OUT:
|
||||
; - CFLAG: set if message is for us, cleared otherwise
|
||||
; REGS: r16, r18. r19. r20, r21, X (R15, R17, R22)
|
||||
|
||||
flashHandleFlashStart:
|
||||
lds r18, flashUid
|
||||
lds r19, flashUid+1
|
||||
lds r20, flashUid+2
|
||||
lds r21, flashUid+3
|
||||
adiw xh:xl, FLASH_PACKET_START_OFFS_UID
|
||||
ld r16, X+
|
||||
cp r16, r18
|
||||
brne flashHandleFlashStart_notMe
|
||||
ld r16, X+
|
||||
cp r16, r19
|
||||
brne flashHandleFlashStart_notMe
|
||||
ld r16, X+
|
||||
cp r16, r20
|
||||
brne flashHandleFlashStart_notMe
|
||||
ld r16, X
|
||||
cp r16, r21
|
||||
brne flashHandleFlashStart_notMe
|
||||
; okay, flash start message is for us
|
||||
rcall flashWaitFor100ms
|
||||
rcall flashSendFlashResponse ; (R15, R16, R17, R18, R19, R20, R21, R22, X)
|
||||
sec
|
||||
ret
|
||||
flashHandleFlashStart_notMe:
|
||||
clc
|
||||
ret
|
||||
|
||||
|
||||
|
||||
@@ -81,8 +81,8 @@ bootLoader:
|
||||
|
||||
sbi DDRA, PORTA3 ; out
|
||||
cbi PORTA, PORTA3 ; on
|
||||
sbi DDRA, PORTA2 ; out (debug)
|
||||
sbi PORTA, PORTA2 ; off (debug)
|
||||
cbi DDRA, PORTA2 ; in (debug led)
|
||||
sbi PORTA, PORTA2 ; pullup on (debug led)
|
||||
|
||||
rcall flashReadUid
|
||||
sts flashUid, r18
|
||||
@@ -90,34 +90,13 @@ bootLoader:
|
||||
sts flashUid+2, r20
|
||||
sts flashUid+3, r21
|
||||
|
||||
; wait for 3 secs before sending message
|
||||
; wait for 3 secs before doing anything else
|
||||
ldi r16, 30
|
||||
rcall flashWaitForMulti100ms
|
||||
|
||||
; send flash ready message
|
||||
ldi xl, LOW(flashSendBuffer)
|
||||
ldi xh, HIGH(flashSendBuffer)
|
||||
rcall flashWriteFlashReady
|
||||
rcall flashSendPacketUntilSuccess
|
||||
|
||||
sbi PORTA, PORTA3 ; LED off
|
||||
|
||||
bootLoader_loop1:
|
||||
; wait up to 10s for incoming FLASH_START message
|
||||
ldi r16, CPRO_CMD_FLASH_START
|
||||
ldi r17, 100 ; 100*100ms=10s
|
||||
rcall flashWaitForSpecificMessageWithLed
|
||||
brcc bootLoader_startFirmware
|
||||
|
||||
; either FLASH_START or FLASH_END received
|
||||
cpi r16, CPRO_CMD_FLASH_START ; not FLASH_START, no flashing requested
|
||||
brne bootLoader_startFirmware
|
||||
; receive and flash new firmware
|
||||
|
||||
rcall flashHandleFlashStart
|
||||
brcc bootLoader_loop1
|
||||
; received a FLASH START msg, handle flashing
|
||||
rcall bootLoaderFlash
|
||||
rcall bootCheckFlash
|
||||
brcc bootLoader_startFirmware ; no flash process, try start installed firmware
|
||||
rcall bootLoaderFlash ; received a FLASH START msg, handle flashing
|
||||
brcc bootLoader_waitAndRestartBootLoader
|
||||
|
||||
; try to start firmware
|
||||
@@ -136,6 +115,44 @@ bootLoader_waitAndRestartBootLoader:
|
||||
|
||||
|
||||
|
||||
; ---------------------------------------------------------------------------
|
||||
; check for incoming flash request
|
||||
;
|
||||
; send a FLASH_READY message and wait for about 10s for incoming FLASH_START which is then handled.
|
||||
;
|
||||
; IN:
|
||||
; - R16: message type to receive
|
||||
; - R17: wait time in 100ms (1=100ms, 2=200ms etc.)
|
||||
; OUT:
|
||||
; - CFLAG: set if incoming flash request received, cleared otherwise
|
||||
; - R16: message type received (if CFLAG set)
|
||||
; REGS: R16, R17, X (R1, R2, R18, R19, R20, R21, R22, R24, R25)
|
||||
|
||||
bootCheckFlash:
|
||||
; send flash ready message
|
||||
ldi xl, LOW(flashSendBuffer)
|
||||
ldi xh, HIGH(flashSendBuffer)
|
||||
rcall flashWriteFlashReady ; (R16, R17, R18, R19, R20, Z)
|
||||
rcall flashSendPacketUntilSuccess ; (R16, R17, R18, R21, R22, R24, R25, X)
|
||||
|
||||
bootCheckFlash_loop:
|
||||
; wait up to 10s for incoming FLASH_START message
|
||||
ldi r16, CPRO_CMD_FLASH_START
|
||||
ldi r17, 100 ; 100*100ms=10s
|
||||
rcall flashWaitForSpecificMessageWithLed ; R2, R16, R17 (R1, R24, R25, X)
|
||||
brcc bootRet
|
||||
|
||||
; either FLASH_START or FLASH_END received
|
||||
cpi r16, CPRO_CMD_FLASH_START ; not FLASH_START, no flashing requested
|
||||
brne bootClcRet
|
||||
|
||||
; received FLASH_START
|
||||
rcall flashHandleFlashStart
|
||||
brcc bootCheckFlash_loop
|
||||
ret ; ret with CARRY flag set
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
bootLoaderFlash:
|
||||
@@ -144,456 +161,31 @@ bootLoaderFlash_loop1:
|
||||
ldi r16, CPRO_CMD_FLASH_DATA
|
||||
ldi r17, 100 ; 100*100ms=10s
|
||||
rcall flashWaitForSpecificMessageWithLed
|
||||
brcc bootLoaderFlash_error
|
||||
brcc bootRet
|
||||
|
||||
; either FLASH_DATA or FLASH_END received
|
||||
cpi r16, CPRO_CMD_FLASH_DATA ; not FLASH_DATA, flashing ended/aborted
|
||||
brne bootLoaderFlash_end
|
||||
brne bootSecRet ; FLASH_END received, done
|
||||
; flash data
|
||||
rcall flashHandleFlashData
|
||||
rjmp bootLoaderFlash_loop1
|
||||
bootLoaderFlash_end:
|
||||
sec
|
||||
ret
|
||||
bootLoaderFlash_error:
|
||||
|
||||
|
||||
|
||||
|
||||
bootClcRet:
|
||||
clc
|
||||
bootRet:
|
||||
ret
|
||||
|
||||
|
||||
; ---------------------------------------------------------------------------
|
||||
; wait for a specific message to arrive within given time, flashing LED
|
||||
;
|
||||
; IN:
|
||||
; - R16: message type to receive
|
||||
; - R17: wait time in 100ms (1=100ms, 2=200ms etc.)
|
||||
; OUT:
|
||||
; - CFLAG: set if msg received (either expected msg or FLASH_END), cleared otherwise
|
||||
; - R16: message type received (if CFLAG set)
|
||||
; REGS: R2, R16, R17 (R1, R24, R25, X)
|
||||
|
||||
flashWaitForSpecificMessageWithLed:
|
||||
mov r2, r16
|
||||
sbi PORTA, PORTA3 ; LED off
|
||||
|
||||
flashWaitForSpecificMessageWithLed_loop:
|
||||
sbi PINA, PORTA3 ; toggle LED
|
||||
mov r16, r2
|
||||
push r17
|
||||
ldi r17, 100 ; wait up to 100ms
|
||||
rcall flashWaitForSpecificMessage ; (R1, R16, R17, R24, R25, X)
|
||||
pop r17
|
||||
brcs flashWaitForSpecificMessageWithLed_received
|
||||
dec r17
|
||||
brne flashWaitForSpecificMessageWithLed_loop
|
||||
sbi PORTA, PORTA3 ; off
|
||||
clc
|
||||
ret
|
||||
flashWaitForSpecificMessageWithLed_received:
|
||||
sbi PORTA, PORTA3 ; off
|
||||
bootSecRet:
|
||||
sec
|
||||
ret
|
||||
|
||||
|
||||
|
||||
; ---------------------------------------------------------------------------
|
||||
; wait for a specific message to arrive within given time.
|
||||
;
|
||||
; IN:
|
||||
; - R16: msg command to wait for
|
||||
; - R17: time to wait for packet (in milliseconds)
|
||||
; OUT:
|
||||
; - CFLAG: set if msg received, cleared on timeout
|
||||
; - R16 : message type received
|
||||
; REGS: R1, R16, R17, X (R24, R25)
|
||||
|
||||
flashWaitForSpecificMessage:
|
||||
mov r1, r16 ; expected message type
|
||||
flashWaitForSpecificMessage_loop0:
|
||||
; wait for ATTN to go low
|
||||
flashWaitForSpecificMessage_loop1:
|
||||
ldi r16, 0 ; wait for low
|
||||
rcall flashWaitForAttnState1ms ; (R22, R24)
|
||||
brcs flashWaitForSpecificMessage_isLow
|
||||
dec r17
|
||||
brne flashWaitForSpecificMessage_loop1
|
||||
rjmp flashWaitForSpecificMessage_timeout
|
||||
; receive message
|
||||
flashWaitForSpecificMessage_isLow: ; is low, receive message, check for msg type
|
||||
push r17
|
||||
ldi r16, COM2_MAINTENANCE_ADDR
|
||||
ldi r17, FLASH_RECVBUFFER_MAXLEN-3
|
||||
ldi xl, LOW(flashRecvBuffer)
|
||||
ldi xh, HIGH(flashRecvBuffer)
|
||||
rcall com2ReceivePacketRaw
|
||||
pop r17
|
||||
brcc flashWaitForSpecificMessage_waitAttnHigh
|
||||
ldi xl, LOW(flashRecvBuffer)
|
||||
ldi xh, HIGH(flashRecvBuffer)
|
||||
adiw xh:xl, COM2_MSG_OFFS_CMD
|
||||
ld r16, X
|
||||
sbiw xh:xl, COM2_MSG_OFFS_CMD
|
||||
cp r16, r1
|
||||
breq flashWaitForSpecificMessage_received
|
||||
cpi r16, CPRO_CMD_FLASH_END
|
||||
breq flashWaitForSpecificMessage_received
|
||||
|
||||
flashWaitForSpecificMessage_waitAttnHigh:
|
||||
dec r17
|
||||
breq flashWaitForSpecificMessage_timeout
|
||||
; wait for ATTN to go high
|
||||
flashWaitForSpecificMessage_loop2:
|
||||
ldi r16, 0xff ; wait for high
|
||||
rcall flashWaitForAttnState1ms ; (R22, R24)
|
||||
brcs flashWaitForSpecificMessage_isHigh
|
||||
dec r17
|
||||
brne flashWaitForSpecificMessage_loop2
|
||||
rjmp flashWaitForSpecificMessage_timeout
|
||||
|
||||
flashWaitForSpecificMessage_isHigh:
|
||||
rjmp flashWaitForSpecificMessage_loop0
|
||||
flashWaitForSpecificMessage_received: ; R16 contains message type
|
||||
sec
|
||||
ret
|
||||
flashWaitForSpecificMessage_timeout:
|
||||
clc
|
||||
ret
|
||||
|
||||
|
||||
|
||||
; ---------------------------------------------------------------------------
|
||||
; Wait for up to 1ms for ATTN line to reach the given state
|
||||
;
|
||||
; IN:
|
||||
; - R16: expected state (0xff for high, 0 for low)
|
||||
; OUT:
|
||||
; - CFLAG: set if state reached, cleared otherwise
|
||||
; REGS: R24 (R22)
|
||||
|
||||
flashWaitForAttnState1ms:
|
||||
ldi r24, 100
|
||||
flashWaitForAttnState1ms_loop:
|
||||
push r17
|
||||
in r17, COM_PIN_ATTN
|
||||
eor r17, r16
|
||||
andi r17, (1<<COM_PINNUM_ATTN)
|
||||
pop r17
|
||||
breq flashWaitForAttnState1ms_stateReached
|
||||
|
||||
Utils_WaitNanoSecs 10000, 0, r22 ; wait for 10us
|
||||
dec r24
|
||||
brne flashWaitForAttnState1ms_loop
|
||||
clc
|
||||
ret
|
||||
flashWaitForAttnState1ms_stateReached:
|
||||
sec
|
||||
ret
|
||||
|
||||
|
||||
|
||||
; ---------------------------------------------------------------------------
|
||||
; wait indefinately until ATTN line is high, send packet over wire, retry until successfull
|
||||
;
|
||||
; IN:
|
||||
; - x : ptr to buffer to send
|
||||
; OUT:
|
||||
; - nothing
|
||||
; REGS: R15, R16, R22 (R17, R21, X)
|
||||
|
||||
flashSendPacketUntilSuccess:
|
||||
push xl
|
||||
push xh
|
||||
rcall COM2_SendPacketWithAttn
|
||||
pop xh
|
||||
pop xl
|
||||
brcc flashSendPacket_error
|
||||
ret
|
||||
flashSendPacket_error:
|
||||
rcall flashWaitForAttnHigh
|
||||
rjmp flashSendPacketUntilSuccess
|
||||
|
||||
|
||||
|
||||
; ---------------------------------------------------------------------------
|
||||
; wait indefinately for free ATTN line
|
||||
;
|
||||
; IN:
|
||||
; - nothing
|
||||
; OUT:
|
||||
; - nothing
|
||||
; REGS: R15, R16, R22 (R17, R21, X)
|
||||
|
||||
flashWaitForAttnHigh:
|
||||
rcall com2WaitForAttnHigh ; waits for up to 100us
|
||||
brcc flashWaitForAttnHigh_stillLow
|
||||
ret
|
||||
flashWaitForAttnHigh_stillLow:
|
||||
rcall flashWaitDependingOnUid ; (R16, R18, R22, R24, R25)
|
||||
rjmp flashWaitForAttnHigh
|
||||
|
||||
|
||||
|
||||
; ---------------------------------------------------------------------------
|
||||
; wait depending on lowest byte of uid.
|
||||
;
|
||||
; Wait interval is between 100ms and 25s (i.e. 255*100ms). This is used to avoid
|
||||
; all nodes on the network trying to send messages at the exact same time (e.g. after
|
||||
; power outage which would affect all nodes at the same time).
|
||||
;
|
||||
; IN:
|
||||
; - nothing
|
||||
; OUT:
|
||||
; - nothing
|
||||
; REGS: R16 (R18, R22, R24, R25)
|
||||
|
||||
flashWaitDependingOnUid:
|
||||
lds r16, flashUid
|
||||
tst r16
|
||||
brne flashWaitDependingOnUid_l1
|
||||
ldi r16, 17
|
||||
flashWaitDependingOnUid_l1:
|
||||
rjmp flashWaitForMulti100ms
|
||||
|
||||
|
||||
|
||||
; ---------------------------------------------------------------------------
|
||||
; wait for multiples of 100ms.
|
||||
;
|
||||
; IN:
|
||||
; - R16: number of 100ms loops
|
||||
; OUT:
|
||||
; - nothing
|
||||
; REGS: R16 (R18, R22, R24, R25)
|
||||
|
||||
flashWaitForMulti100ms:
|
||||
flashWaitForMulti100ms_loop:
|
||||
rcall flashWaitFor100ms ; (R18, R22, R24, R25)
|
||||
dec r16
|
||||
brne flashWaitForMulti100ms_loop
|
||||
ret
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
; ---------------------------------------------------------------------------
|
||||
; wait for 100 milliseconds.
|
||||
;
|
||||
; IN:
|
||||
; - nothing
|
||||
; OUT:
|
||||
; - nothing
|
||||
; REGS: R18 (R22, R24, R25)
|
||||
|
||||
flashWaitFor100ms:
|
||||
ldi r18, 100
|
||||
flashWaitFor100ms_loop:
|
||||
rcall flashWaitFor1ms ; (R22, R24, R25)
|
||||
dec r18
|
||||
brne flashWaitFor100ms_loop
|
||||
ret
|
||||
|
||||
|
||||
|
||||
; ---------------------------------------------------------------------------
|
||||
; wait for 1 millisecond.
|
||||
;
|
||||
; IN:
|
||||
; - nothing
|
||||
; OUT:
|
||||
; - nothing
|
||||
; REGS: R24 (R22)
|
||||
|
||||
flashWaitFor1ms:
|
||||
ldi r24, 10
|
||||
flashWaitFor1ms_loop:
|
||||
Utils_WaitNanoSecs 100000, 0, r22 ; wait for 100us
|
||||
dec r24
|
||||
brne flashWaitFor1ms_loop
|
||||
ret
|
||||
|
||||
|
||||
|
||||
|
||||
; ---------------------------------------------------------------------------
|
||||
; Write a FLASH_RESPONSE packet.
|
||||
;
|
||||
; IN:
|
||||
; - R16: response code (0 if ok, error code otherwise)
|
||||
; - X : buffer to write to
|
||||
; OUT:
|
||||
; - nothing
|
||||
; MODIFIED REGS: R16, R17 (R18, R19, R20)
|
||||
|
||||
flashWriteFlashRsp:
|
||||
clr r18
|
||||
st X+, r18 ; dest address (unused)
|
||||
ldi r18, 3 ; msg code+src address+one payload byte
|
||||
st X+, r18 ; msg len
|
||||
ldi r17, CPRO_CMD_FLASH_RSP
|
||||
st X+, r17 ; msg code
|
||||
clr r17
|
||||
st X+, r17 ; src address (not used)
|
||||
st X, r16 ; payload byte
|
||||
sbiw xh:xl, 4
|
||||
rcall com2CalcAndAddChecksumByte ; (R16, R17, R18, R19, R20, X)
|
||||
sbiw xh:xl, 5
|
||||
ret
|
||||
|
||||
|
||||
|
||||
; ---------------------------------------------------------------------------
|
||||
; Write a FLASH_READY packet.
|
||||
;
|
||||
; IN:
|
||||
; - X : buffer to write to
|
||||
; OUT:
|
||||
; - nothing
|
||||
; MODIFIED REGS: R16, Z (R17, R18, R19, R20)
|
||||
|
||||
flashWriteFlashReady:
|
||||
ldi r16, 0xff
|
||||
st X+, r16 ; dest address (unused)
|
||||
ldi r16, 12 ; msg code+src address+ten payload bytes
|
||||
st X+, r16 ; msg len
|
||||
ldi r16, CPRO_CMD_FLASH_READY
|
||||
st X+, r16 ; msg code
|
||||
ldi r16, COM2_MAINTENANCE_ADDR
|
||||
st X+, r16 ; src address (not used)
|
||||
; payload
|
||||
lds r16, flashUid
|
||||
st X+, r16
|
||||
lds r16, flashUid+1
|
||||
st X+, r16
|
||||
lds r16, flashUid+2
|
||||
st X+, r16
|
||||
lds r16, flashUid+3
|
||||
st X+, r16
|
||||
ldi zl, low(firmwareType*2)
|
||||
ldi zh, HIGH(firmwareType*2)
|
||||
lpm r16, Z+
|
||||
st X+, r16 ; firmwareType (low)
|
||||
lpm r16, Z+
|
||||
st X+, r16 ; firmwareType (high)
|
||||
lpm r16, Z+
|
||||
st X+, r16 ; firmwareVersion (low)
|
||||
lpm r16, Z+
|
||||
st X+, r16 ; firmwareVersion (high)
|
||||
ldi r16, LOW(PAGESIZE*2)
|
||||
st X+, r16
|
||||
ldi r16, HIGH(PAGESIZE*2)
|
||||
st X, r16
|
||||
sbiw xh:xl, 13
|
||||
rcall com2CalcAndAddChecksumByte ; (R16, R17, R18, R19, R20, X)
|
||||
sbiw xh:xl, 14
|
||||
ret
|
||||
|
||||
|
||||
|
||||
; ---------------------------------------------------------------------------
|
||||
; Handle FLASH START packet.
|
||||
;
|
||||
; IN:
|
||||
; - X : buffer containing the message
|
||||
; OUT:
|
||||
; - CFLAG: set if message is for us, cleared otherwise
|
||||
; REGS: r16, r18. r19. r20, r21, X (R15, R17, R22)
|
||||
|
||||
flashHandleFlashStart:
|
||||
lds r18, flashUid
|
||||
lds r19, flashUid+1
|
||||
lds r20, flashUid+2
|
||||
lds r21, flashUid+3
|
||||
adiw xh:xl, FLASH_PACKET_START_OFFS_UID
|
||||
ld r16, X+
|
||||
cp r16, r18
|
||||
brne flashHandleFlashStart_notMe
|
||||
ld r16, X+
|
||||
cp r16, r19
|
||||
brne flashHandleFlashStart_notMe
|
||||
ld r16, X+
|
||||
cp r16, r20
|
||||
brne flashHandleFlashStart_notMe
|
||||
ld r16, X
|
||||
cp r16, r21
|
||||
brne flashHandleFlashStart_notMe
|
||||
; okay, flash start message is for us
|
||||
rcall flashWaitFor100ms
|
||||
rcall flashSendFlashResponse ; (R15, R16, R17, R18, R19, R20, R21, R22, X)
|
||||
sec
|
||||
ret
|
||||
flashHandleFlashStart_notMe:
|
||||
clc
|
||||
ret
|
||||
|
||||
|
||||
|
||||
; ---------------------------------------------------------------------------
|
||||
; Handle FLASH DATA packet.
|
||||
;
|
||||
; IN:
|
||||
; - X : buffer containing the message
|
||||
; OUT:
|
||||
; - CFLAG: set if message is for us, cleared otherwise
|
||||
; REGS: R0, R1, R15, R16, R17, R18, R19, R20, R21, R24, R25, X, Z
|
||||
|
||||
flashHandleFlashData:
|
||||
adiw xh:xl, FLASH_MSG_OFFS_MSGLEN
|
||||
ld r18, X ; length (subtract 6
|
||||
cpi r18, 6 ; cmd(1), src(1), addr(4)
|
||||
brcs flashHandleFlashData_badData
|
||||
subi r18, 6 ; remaining length
|
||||
adiw xh:xl, FLASH_PACKET_DATA_OFFS_ADDR-FLASH_MSG_OFFS_MSGLEN
|
||||
ld zl, X+ ; address (low)
|
||||
ld zh, X+ ; address (high)
|
||||
adiw xh:xl, 2 ; ignore high bytes, points to first data byte now
|
||||
|
||||
; rcall Flash_StartPage ; (R0, R1, R16, R20, R24, R25)
|
||||
push zl
|
||||
push zh
|
||||
flashHandleFlashData_loop:
|
||||
ld r0, X+
|
||||
ld r1, X+
|
||||
rcall Flash_WriteIntoPage ; (R15, R16, Z+)
|
||||
subi r18, 2
|
||||
brne flashHandleFlashData_loop
|
||||
pop zh
|
||||
pop zl
|
||||
rcall Flash_FinishPage ; (R15, R16, R20)
|
||||
clr r16
|
||||
rjmp flashHandleFlashData_sendResponse
|
||||
flashHandleFlashData_badData:
|
||||
ldi r16, FLASH_ERROR_MSGERROR
|
||||
flashHandleFlashData_sendResponse:
|
||||
rcall flashSendFlashResponse ; (R15, R16, R17, R18, R19, R20, R21, R22, X)
|
||||
sec
|
||||
ret
|
||||
|
||||
|
||||
|
||||
; ---------------------------------------------------------------------------
|
||||
; Create and send a FLASH RESPONSE packet
|
||||
;
|
||||
; IN:
|
||||
; - R16: response code to send
|
||||
; OUT:
|
||||
; - nothing
|
||||
; REGS: r16, X (R15, R17, R18, R19, R20, R21, R22)
|
||||
|
||||
flashSendFlashResponse:
|
||||
; send flash ready message
|
||||
ldi xl, LOW(flashSendBuffer)
|
||||
ldi xh, HIGH(flashSendBuffer)
|
||||
clr r16
|
||||
rcall flashWriteFlashRsp ; (R16, R17, R18, R19, R20)
|
||||
rjmp flashSendPacketUntilSuccess ; (R15, R16, R17, R21, R22, X)
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
FLASH_PROTO_END:
|
||||
.equ MODULE_SIZE_FLASH_PROTO = FLASH_PROTO_END-FLASH_PROTO_BEGIN
|
||||
|
||||
|
||||
150
avr/modules/flash/recv.asm
Normal file
150
avr/modules/flash/recv.asm
Normal file
@@ -0,0 +1,150 @@
|
||||
; ***************************************************************************
|
||||
; copyright : (C) 2023 by Martin Preuss
|
||||
; email : martin@libchipcard.de
|
||||
;
|
||||
; ***************************************************************************
|
||||
; * This file is part of the project "AqHome". *
|
||||
; * Please see toplevel file COPYING of that project for license details. *
|
||||
; ***************************************************************************
|
||||
|
||||
|
||||
|
||||
; ***************************************************************************
|
||||
; code
|
||||
|
||||
|
||||
.cseg
|
||||
|
||||
|
||||
|
||||
|
||||
; ---------------------------------------------------------------------------
|
||||
; wait for a specific message to arrive within given time, flashing LED
|
||||
;
|
||||
; IN:
|
||||
; - R16: message type to receive
|
||||
; - R17: wait time in 100ms (1=100ms, 2=200ms etc.)
|
||||
; OUT:
|
||||
; - CFLAG: set if msg received (either expected msg or FLASH_END), cleared otherwise
|
||||
; - R16: message type received (if CFLAG set)
|
||||
; REGS: R2, R16, R17 (R1, R24, R25, X)
|
||||
|
||||
flashWaitForSpecificMessageWithLed:
|
||||
mov r2, r16
|
||||
sbi PORTA, PORTA3 ; LED off
|
||||
|
||||
flashWaitForSpecificMessageWithLed_loop:
|
||||
sbi PINA, PORTA3 ; toggle LED
|
||||
mov r16, r2
|
||||
push r17
|
||||
ldi r17, 100 ; wait up to 100ms
|
||||
rcall flashWaitForSpecificMessage ; (R1, R16, R17, R24, R25, X)
|
||||
pop r17
|
||||
brcs flashWaitForSpecificMessageWithLed_received
|
||||
dec r17
|
||||
brne flashWaitForSpecificMessageWithLed_loop
|
||||
sbi PORTA, PORTA3 ; off
|
||||
rjmp flash_recv_clc_ret ; timeout
|
||||
flashWaitForSpecificMessageWithLed_received:
|
||||
sbi PORTA, PORTA3 ; off
|
||||
sec
|
||||
ret
|
||||
|
||||
|
||||
|
||||
; ---------------------------------------------------------------------------
|
||||
; wait for a specific message to arrive within given time.
|
||||
;
|
||||
; IN:
|
||||
; - R16: msg command to wait for
|
||||
; - R17: time to wait for packet (in milliseconds)
|
||||
; OUT:
|
||||
; - CFLAG: set if msg received, cleared on timeout
|
||||
; - R16 : message type received
|
||||
; REGS: R1, R16, R17, X (R24, R25)
|
||||
|
||||
flashWaitForSpecificMessage:
|
||||
mov r1, r16 ; expected message type
|
||||
flashWaitForSpecificMessage_loop0:
|
||||
; wait for ATTN to go low
|
||||
flashWaitForSpecificMessage_loop1:
|
||||
ldi r16, 0 ; wait for low
|
||||
rcall flashWaitForAttnState1ms ; (R22, R24)
|
||||
brcs flashWaitForSpecificMessage_isLow
|
||||
dec r17
|
||||
brne flashWaitForSpecificMessage_loop1
|
||||
rjmp flash_recv_clc_ret ; timeout
|
||||
; receive message
|
||||
flashWaitForSpecificMessage_isLow: ; is low, receive message, check for msg type
|
||||
push r17
|
||||
ldi r16, COM2_MAINTENANCE_ADDR
|
||||
ldi r17, FLASH_RECVBUFFER_MAXLEN-3
|
||||
ldi xl, LOW(flashRecvBuffer)
|
||||
ldi xh, HIGH(flashRecvBuffer)
|
||||
rcall com2ReceivePacketRaw
|
||||
pop r17
|
||||
brcc flashWaitForSpecificMessage_waitAttnHigh
|
||||
ldi xl, LOW(flashRecvBuffer)
|
||||
ldi xh, HIGH(flashRecvBuffer)
|
||||
adiw xh:xl, COM2_MSG_OFFS_CMD
|
||||
ld r16, X
|
||||
sbiw xh:xl, COM2_MSG_OFFS_CMD
|
||||
cp r16, r1
|
||||
breq flashWaitForSpecificMessage_received
|
||||
cpi r16, CPRO_CMD_FLASH_END
|
||||
breq flashWaitForSpecificMessage_received
|
||||
|
||||
flashWaitForSpecificMessage_waitAttnHigh:
|
||||
dec r17
|
||||
breq flash_recv_clc_ret
|
||||
; wait for ATTN to go high
|
||||
flashWaitForSpecificMessage_loop2:
|
||||
ldi r16, 0xff ; wait for high
|
||||
rcall flashWaitForAttnState1ms ; (R22, R24)
|
||||
brcs flashWaitForSpecificMessage_isHigh
|
||||
dec r17
|
||||
brne flashWaitForSpecificMessage_loop2
|
||||
rjmp flash_recv_clc_ret ; timeout
|
||||
|
||||
flashWaitForSpecificMessage_isHigh:
|
||||
rjmp flashWaitForSpecificMessage_loop0
|
||||
flashWaitForSpecificMessage_received: ; R16 contains message type
|
||||
sec
|
||||
ret
|
||||
|
||||
|
||||
|
||||
; ---------------------------------------------------------------------------
|
||||
; Wait for up to 1ms for ATTN line to reach the given state
|
||||
;
|
||||
; IN:
|
||||
; - R16: expected state (0xff for high, 0 for low)
|
||||
; OUT:
|
||||
; - CFLAG: set if state reached, cleared otherwise
|
||||
; REGS: R24 (R22)
|
||||
|
||||
flashWaitForAttnState1ms:
|
||||
ldi r24, 100
|
||||
flashWaitForAttnState1ms_loop:
|
||||
push r17
|
||||
in r17, COM_PIN_ATTN
|
||||
eor r17, r16
|
||||
andi r17, (1<<COM_PINNUM_ATTN)
|
||||
pop r17
|
||||
breq flashWaitForAttnState1ms_stateReached
|
||||
|
||||
Utils_WaitNanoSecs 10000, 0, r22 ; wait for 10us
|
||||
dec r24
|
||||
brne flashWaitForAttnState1ms_loop
|
||||
rjmp flash_recv_clc_ret
|
||||
flashWaitForAttnState1ms_stateReached:
|
||||
sec
|
||||
ret
|
||||
|
||||
|
||||
flash_recv_clc_ret:
|
||||
clc
|
||||
flash_recv_ret:
|
||||
ret
|
||||
|
||||
|
||||
62
avr/modules/flash/send.asm
Normal file
62
avr/modules/flash/send.asm
Normal file
@@ -0,0 +1,62 @@
|
||||
; ***************************************************************************
|
||||
; copyright : (C) 2023 by Martin Preuss
|
||||
; email : martin@libchipcard.de
|
||||
;
|
||||
; ***************************************************************************
|
||||
; * This file is part of the project "AqHome". *
|
||||
; * Please see toplevel file COPYING of that project for license details. *
|
||||
; ***************************************************************************
|
||||
|
||||
|
||||
|
||||
; ***************************************************************************
|
||||
; code
|
||||
|
||||
|
||||
.cseg
|
||||
|
||||
|
||||
|
||||
; ---------------------------------------------------------------------------
|
||||
; wait indefinately until ATTN line is high, send packet over wire, retry until successfull
|
||||
;
|
||||
; IN:
|
||||
; - x : ptr to buffer to send
|
||||
; OUT:
|
||||
; - nothing
|
||||
; REGS: (R16, R17, R18, R21, R22, R24, R25, X)
|
||||
|
||||
flashSendPacketUntilSuccess:
|
||||
push xl
|
||||
push xh
|
||||
rcall COM2_SendPacketWithAttn ; (R16, R17, R21, R22, X)
|
||||
pop xh
|
||||
pop xl
|
||||
brcc flashSendPacket_error
|
||||
ret
|
||||
flashSendPacket_error:
|
||||
rcall flashWaitForAttnHigh ; (R16, R17, R18, R22, R24, R25, X)
|
||||
rjmp flashSendPacketUntilSuccess
|
||||
|
||||
|
||||
|
||||
; ---------------------------------------------------------------------------
|
||||
; wait indefinately for free ATTN line
|
||||
;
|
||||
; IN:
|
||||
; - nothing
|
||||
; OUT:
|
||||
; - nothing
|
||||
; REGS: (R16, R17, R18, R22, R24, R25, X)
|
||||
|
||||
flashWaitForAttnHigh:
|
||||
rcall com2WaitForAttnHigh ; (r17, r22, X)
|
||||
brcc flashWaitForAttnHigh_stillLow
|
||||
ret
|
||||
flashWaitForAttnHigh_stillLow:
|
||||
rcall flashWaitDependingOnUid ; (R16, R18, R22, R24, R25)
|
||||
rjmp flashWaitForAttnHigh
|
||||
|
||||
|
||||
|
||||
|
||||
100
avr/modules/flash/wait.asm
Normal file
100
avr/modules/flash/wait.asm
Normal file
@@ -0,0 +1,100 @@
|
||||
; ***************************************************************************
|
||||
; copyright : (C) 2023 by Martin Preuss
|
||||
; email : martin@libchipcard.de
|
||||
;
|
||||
; ***************************************************************************
|
||||
; * This file is part of the project "AqHome". *
|
||||
; * Please see toplevel file COPYING of that project for license details. *
|
||||
; ***************************************************************************
|
||||
|
||||
|
||||
|
||||
; ***************************************************************************
|
||||
; code
|
||||
|
||||
|
||||
.cseg
|
||||
|
||||
|
||||
; ---------------------------------------------------------------------------
|
||||
; wait depending on lowest byte of uid.
|
||||
;
|
||||
; Wait interval is between 100ms and 25s (i.e. 255*100ms). This is used to avoid
|
||||
; all nodes on the network trying to send messages at the exact same time (e.g. after
|
||||
; power outage which would affect all nodes at the same time).
|
||||
;
|
||||
; IN:
|
||||
; - nothing
|
||||
; OUT:
|
||||
; - nothing
|
||||
; REGS: R16 (R18, R22, R24, R25)
|
||||
|
||||
flashWaitDependingOnUid:
|
||||
lds r16, flashUid
|
||||
tst r16
|
||||
brne flashWaitDependingOnUid_l1
|
||||
ldi r16, 17
|
||||
flashWaitDependingOnUid_l1:
|
||||
rjmp flashWaitForMulti100ms
|
||||
|
||||
|
||||
|
||||
; ---------------------------------------------------------------------------
|
||||
; wait for multiples of 100ms.
|
||||
;
|
||||
; IN:
|
||||
; - R16: number of 100ms loops
|
||||
; OUT:
|
||||
; - nothing
|
||||
; REGS: R16 (R18, R22, R24, R25)
|
||||
|
||||
flashWaitForMulti100ms:
|
||||
flashWaitForMulti100ms_loop:
|
||||
rcall flashWaitFor100ms ; (R18, R22, R24, R25)
|
||||
dec r16
|
||||
brne flashWaitForMulti100ms_loop
|
||||
ret
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
; ---------------------------------------------------------------------------
|
||||
; wait for 100 milliseconds.
|
||||
;
|
||||
; IN:
|
||||
; - nothing
|
||||
; OUT:
|
||||
; - nothing
|
||||
; REGS: R18 (R22, R24, R25)
|
||||
|
||||
flashWaitFor100ms:
|
||||
ldi r18, 100
|
||||
flashWaitFor100ms_loop:
|
||||
rcall flashWaitFor1ms ; (R22, R24, R25)
|
||||
dec r18
|
||||
brne flashWaitFor100ms_loop
|
||||
ret
|
||||
|
||||
|
||||
|
||||
; ---------------------------------------------------------------------------
|
||||
; wait for 1 millisecond.
|
||||
;
|
||||
; IN:
|
||||
; - nothing
|
||||
; OUT:
|
||||
; - nothing
|
||||
; REGS: R24 (R22)
|
||||
|
||||
flashWaitFor1ms:
|
||||
ldi r24, 10
|
||||
flashWaitFor1ms_loop:
|
||||
Utils_WaitNanoSecs 100000, 0, r22 ; wait for 100us
|
||||
dec r24
|
||||
brne flashWaitFor1ms_loop
|
||||
ret
|
||||
|
||||
|
||||
|
||||
Reference in New Issue
Block a user