avr/uart_hw: basically works for a while then stops...

avr/devices/t03/defs.asm

@@ -54,6 +54,7 @@
 .equ COM_ATTN_DDR       = DDRA
 .equ COM_ATTN_INPUT     = PINA
 .equ COM_ATTN_OUTPUT    = PORTA
+.equ COM_ATTN_PUE       = PUEA
 .equ COM_ATTN_PIN       = PORTA0
 
 .equ COM_IRQ_ADDR_ATTN   = PCMSK0

avr/devices/t03/main.asm

@@ -25,8 +25,9 @@
 .equ clock=8000000 ; Define the clock frequency
 
 ;.equ SEND_DEVICE_EVERY = 3000
-.equ SEND_DEVICE_EVERY = 100    ; every 10s
+.equ SEND_DEVICE_EVERY = 520    ; every 52s
-.equ SEND_STATS_EVERY  = 600    ; every minute
+.equ SEND_STATS_EVERY  = 240    ; every 24s
+.equ SEND_DEBUG_EVERY  = 110
 
 .nolist
 .include "include/tn841def.inc" ; Define device ATtiny841
@@ -90,37 +91,37 @@
 ; ---------------------------------------------------------------------------
 ; Reset and interrupt vectors
 
-        rjmp BOOTLOADER_ADDR      ;  1: RESET             Reset vector  use this for flashed system
+        rjmp BOOTLOADER_ADDR          ;  1: RESET             Reset vector  use this for flashed system
-	reti                      ;  2: INT0              External Interrupt Request 0
+	reti                          ;  2: INT0              External Interrupt Request 0
-	reti                      ;  3: PCINT0            Pin Change Interrupt 0
+	rjmp ComOnUart0_AttnChangeIsr ;  3: PCINT0            Pin Change Interrupt 0
-	reti                      ;  4: PCINT1            Pin Change Interrupt 1
+	reti                          ;  4: PCINT1            Pin Change Interrupt 1
-	reti                      ;  5: WDT               Watchdog Time-out
+	reti                          ;  5: WDT               Watchdog Time-out
-	reti                      ;  6: TIM1_CAPT         Timer/Counter1 Capture Event
+	reti                          ;  6: TIM1_CAPT         Timer/Counter1 Capture Event
-	reti                      ;  7: TIM1_COMPA (OC1A) Timer/Counter1 Compare Match A
+	reti                          ;  7: TIM1_COMPA (OC1A) Timer/Counter1 Compare Match A
-	reti                      ;  8: TIM1_COMPB (OC1B) Timer/Counter1 Compare Match B
+	reti                          ;  8: TIM1_COMPB (OC1B) Timer/Counter1 Compare Match B
-	reti                      ;  9: TIM1_OVF (OVF1)   Timer/Counter1 Overflow
+	reti                          ;  9: TIM1_OVF (OVF1)   Timer/Counter1 Overflow
-        rjmp baseTimerIrqOC0A     ; 10: TIM0_COMPA (OC0A) Timer/Counter0 Compare Match A
+        rjmp baseTimerIrqOC0A         ; 10: TIM0_COMPA (OC0A) Timer/Counter0 Compare Match A
-	reti                      ; 11: TIM0_COMPB (OC0B) Timer/Counter0 Compare Match B
+	reti                          ; 11: TIM0_COMPB (OC0B) Timer/Counter0 Compare Match B
-	reti                      ; 12: TIM0_OVF (OVF0)   Timer/Counter0 Overflow
+	reti                          ; 12: TIM0_OVF (OVF0)   Timer/Counter0 Overflow
-	reti                      ; 13: ANA_COMP0         Analog Comparator 0
+	reti                          ; 13: ANA_COMP0         Analog Comparator 0
-        reti                      ; 14: ADC_READY         ADC Conversion Complete
+        reti                          ; 14: ADC_READY         ADC Conversion Complete
-        reti                      ; 15: EE_RDY (ERDY)     EEPROM Ready
+        reti                          ; 15: EE_RDY (ERDY)     EEPROM Ready
-        reti                      ; 16: ANA_COMP1         Analog Comparator 1
+        reti                          ; 16: ANA_COMP1         Analog Comparator 1
-        reti                      ; 17: TIM2_CAPT         Timer/Counter2 Capture Event
+        reti                          ; 17: TIM2_CAPT         Timer/Counter2 Capture Event
-        reti                      ; 18: TIM2_COMPA (OC2A) Timer/Counter2 Compare Match A
+        reti                          ; 18: TIM2_COMPA (OC2A) Timer/Counter2 Compare Match A
-        reti                      ; 19: TIM2_COMPB (OC2B) Timer/Counter2 Compare Match B
+        reti                          ; 19: TIM2_COMPB (OC2B) Timer/Counter2 Compare Match B
-        reti                      ; 20: TIM2_OVF (OVF2)   Timer/Counter2 Overflow
+        reti                          ; 20: TIM2_OVF (OVF2)   Timer/Counter2 Overflow
-        reti                      ; 21: SPI               SPI Serial Transfer Complete
+        reti                          ; 21: SPI               SPI Serial Transfer Complete
-        reti                      ; 22: USART0_RXS        USART0 Rx Start
+        reti                          ; 22: USART0_RXS        USART0 Rx Start
-        reti                      ; 23: USART0_RXC        USART0 Rx Complete
+        rjmp ComOnUart0_RxCharIsr     ; 23: USART0_RXC        USART0 Rx Complete
-        reti                      ; 24: USART0_DRE        USART0 Data Register Empty
+        rjmp ComOnUart0_TxUdreIsr     ; 24: USART0_DRE        USART0 Data Register Empty
-        reti                      ; 25: USART0_TXC        USART0 Tx Complete
+        rjmp ComOnUart0_TxCharIsr     ; 25: USART0_TXC        USART0 Tx Complete
-        reti                      ; 26: USART1_RXS        USART1 Rx Start
+        reti                          ; 26: USART1_RXS        USART1 Rx Start
-        rjmp TtyOnUart1_RxCharIsr ; 27: USART1_RXC        USART1 Rx Complete
+        rjmp TtyOnUart1_RxCharIsr     ; 27: USART1_RXC        USART1 Rx Complete
-        rjmp TtyOnUart1_TxUdreIsr ; 28: USART1_DRE        USART1 Data Register Empty
+        rjmp TtyOnUart1_TxUdreIsr     ; 28: USART1_DRE        USART1 Data Register Empty
-        rjmp TtyOnUart1_TxCharIsr ; 29: USART1_TXC        USART1 Tx Complete
+        rjmp TtyOnUart1_TxCharIsr     ; 29: USART1_TXC        USART1 Tx Complete
-        reti                      ; 30: TWI               Two-Wire-Interface
+        reti                          ; 30: TWI               Two-Wire-Interface
-        reti                      ; 31: RESERVED          reserved
+        reti                          ; 31: RESERVED          reserved
 
 
 
@@ -203,11 +204,12 @@ onSystemTimerTick:
 #ifdef MODULES_LED_SIMPLE
   rcall LedSimple_Every100ms
 #endif
+  rcall TtyOnUart1_Periodically
+  rcall sendDebug
   rcall maybeSendDeviceMsg
   rcall maybeSendTStatsMsg
   rcall maybeSendRStatsMsg
   rcall maybeSendMStatsMsg
-  rcall TtyOnUart1_Periodically
   ret
 
 
@@ -240,6 +242,9 @@ initModules:
   rcall LedSimple_Init
   rcall NET_Init
   rcall TtyOnUart1_Init
+  ldi r16, 0xfe
+  sts ttyOnUart1_iface+NET_IFACE_OFFS_ADDRESS, r16
+  rcall ComOnUart0_Init
   
   ldi r16, LOW(SEND_DEVICE_EVERY)
   sts deviceCounter, r16
@@ -261,6 +266,11 @@ initModules:
   ldi r16, HIGH(SEND_STATS_EVERY+20)
   sts sendMStatsCounter+1, r16
 
+  ldi r16, LOW(SEND_DEBUG_EVERY)
+  sts debugMsgCounter, r16
+  ldi r16, HIGH(SEND_DEBUG_EVERY)
+  sts debugMsgCounter+1, r16
+
   ret
 ; @end
 
@@ -292,12 +302,15 @@ initModules:
 .include "modules/network/msg/sendstats-w.asm"
 .include "modules/network/msg/recvstats-w.asm"
 .include "modules/network/msg/memstats-w.asm"
+.include "modules/network/msg/debug-w.asm"
 
 .include "modules/uart_hw/defs.asm"
 .include "modules/uart_hw/lowlevel.asm"
 .include "modules/uart_hw/m_lowlevel_uart.asm"
+.include "modules/uart_hw/lowlevel_uart0.asm"
 .include "modules/uart_hw/lowlevel_uart1.asm"
 .include "modules/uart_hw/ttyonuart1.asm"
+.include "modules/uart_hw/comonuart0.asm"
 
 
 
@@ -320,12 +333,8 @@ maybeSendDeviceMsg:
     rcall NETMSG_Device_Write               ; (R16, R17, R18, R19, R20, R21, Z)
     sbiw xh:xl, 1
   pop r16
-  push r16
+  rcall NET_Interface_AddOrReleaseOutMsg    ; (R16, R17, R18, X)
-    rcall NET_Interface_AddOutgoingMsgNum   ; (R17, R18, X)
+  brcc maybeSendDeviceMsg_end
-  pop r16
-  brcs maybeSendDeviceMsg_resetCounter
-  rcall NET_Buffer_ReleaseByNum             ; (R16, X)
-  rjmp maybeSendDeviceMsg_end
   ; reset counter
 maybeSendDeviceMsg_resetCounter:
   ldi r24, LOW(SEND_DEVICE_EVERY)
@@ -382,9 +391,15 @@ maybeSendRStatsMsg:
 ;  brcc maybeSendTStatsMsg_resetCounter
   brcc maybeSendRStatsMsg_end
   push r16
-    adiw xh:xl, 1
+    push yl
-    rcall NETMSG_RecvStats_Write             ; (R16, R17, R18, R19, R20, R21, Z)
+      push yh
-    sbiw xh:xl, 1
+        ldi yl, LOW(comOnUart0_iface)
+        ldi yh, HIGH(comOnUart0_iface)
+        adiw xh:xl, 1
+        rcall NETMSG_RecvStats_Write             ; (R16, R17, R18, R19, R20, R21, Z)
+        sbiw xh:xl, 1
+      pop yh
+    pop yl
   pop r16
   rcall NET_Interface_AddOrReleaseOutMsg     ; (R16, R17, R18, X)
   brcc maybeSendRStatsMsg_end
@@ -432,10 +447,7 @@ maybeSendMStatsMsg_end:
 
 
 checkRecvdMsg:
-  ldi yl, LOW(ttyOnUart1_iface)
+  rcall NET_PeekNextIncomingMsgNum          ; check read queue (bufNum->r16)
-  ldi yh, HIGH(ttyOnUart1_iface)
-
-  rcall NET_PeekNextIncomingMsgNum          ; check read queue
   brcc checkRecvdMsg_end                    ; no msg, jmp
   rcall NET_Buffer_Locate                   ; (R17)
   adiw xh:xl, 1
@@ -443,20 +455,157 @@ checkRecvdMsg:
     rcall NETMSG_CheckMessageInBuffer       ; (R16, R17, R18, R19, R20, X)
   pop r16
   brcs checkRecvdMsg_sendMsg
+  ; release buffer
   rcall NET_GetNextIncomingMsgNum           ; take off the queue
   rcall NET_Buffer_ReleaseByNum             ; delete
-  ldi r16, NET_IFACE_OFFS_ERR_CONTENT_LOW
+  clc
-  rcall NET_Interface_IncCounter16          ; (R24, R25)
   rjmp checkRecvdMsg_end
 checkRecvdMsg_sendMsg:
-  rcall NET_Interface_AddOutgoingMsgNum     ; try to add msg to interface
+  sbiw xh:xl, 1
+  ld r17, X
+  andi r17, (NET_IFACE_BUFFER_IFACENUM1_BIT | NET_IFACE_BUFFER_IFACENUM0_BIT)
+  rcall reverseInterfaceNum
+  rcall addMsgToInterface
   brcc checkRecvdMsg_end                    ; could not add, jmp
   rcall NET_GetNextIncomingMsgNum           ; take off the queue
+  sec
 checkRecvdMsg_end:
   ret
 
 
 
+; @return r17 reversed interface number
+; @param r17 buffer num
+; @clobbers r17
+
+reverseInterfaceNum:
+  cpi r17, COMONUART0_IFACENUM
+  brne reverseInterfaceNum_notUart0
+  ldi r17, TTYONUART1_IFACENUM
+  ret
+reverseInterfaceNum_notUart0:
+  ldi r17, COMONUART0_IFACENUM
+  ret
+; @end
+
+
+
+; @param r16 buffer num
+; @param r17 interface num
+
+addMsgToInterface:
+  cpi r16, COMONUART0_IFACENUM
+  brne addMsgToInterface_notUart0
+  ldi yl, LOW(ttyOnUart1_iface)
+  ldi yh, HIGH(ttyOnUart1_iface)
+  rjmp NET_Interface_AddOutgoingMsgNum     ; try to add msg to interface
+addMsgToInterface_notUart0:
+  cpi r16, TTYONUART1_IFACENUM
+  brne addMsgToInterface_end
+  ldi yl, LOW(comOnUart0_iface)
+  ldi yh, HIGH(comOnUart0_iface)
+  rjmp NET_Interface_AddOutgoingMsgNum     ; try to add msg to interface
+addMsgToInterface_end:
+  ret
+; @end
+
+
+
+sendDebug:
+  ldi yl, LOW(ttyOnUart1_iface)
+  ldi yh, HIGH(ttyOnUart1_iface)
+  
+  lds r24, debugMsgCounter
+  lds r25, debugMsgCounter+1
+  sbiw r25:r24, 1
+  brne sendDebug_storeCounter
+  ; send device msg
+  rcall NET_Buffer_Alloc                    ; (R16, R17, X)
+  brcc sendDebug_end
+  push r16
+    adiw xh:xl, 1
+    rcall writeDebugMsg
+    sbiw xh:xl, 1
+  pop r16
+  rcall NET_Interface_AddOrReleaseOutMsg    ; (R16, R17, R18, X)
+  brcc sendDebug_end
+  ; reset counter
+sendDebug_resetCounter:
+  ldi r24, LOW(SEND_DEBUG_EVERY)
+  ldi r25, HIGH(SEND_DEBUG_EVERY)
+sendDebug_storeCounter:
+  sts debugMsgCounter, r24
+  sts debugMsgCounter+1, r25
+sendDebug_end:
+  ret
+
+
+writeDebugMsg:
+  push yl
+    push yh
+      ldi yl, LOW(netBuffers)
+      ldi yh, HIGH(netBuffers)
+  
+      rcall writeBufferInfoToRegs
+      mov r0, r17
+      mov r1, r18
+      adiw yh:yl, NET_BUFFERS_SIZE
+  
+      rcall writeBufferInfoToRegs
+      mov r2, r17
+      mov r3, r18
+      adiw yh:yl, NET_BUFFERS_SIZE
+  
+      rcall writeBufferInfoToRegs
+      mov r4, r17
+      mov r5, r18
+      adiw yh:yl, NET_BUFFERS_SIZE
+  
+      rcall writeBufferInfoToRegs
+      mov r6, r17
+      mov r7, r18
+      adiw yh:yl, NET_BUFFERS_SIZE
+  
+      rcall writeBufferInfoToRegs
+      mov r8, r17
+      mov r9, r18
+      adiw yh:yl, NET_BUFFERS_SIZE
+  
+      rcall writeBufferInfoToRegs
+      mov r10, r17
+      mov r11, r18
+      adiw yh:yl, NET_BUFFERS_SIZE
+  
+      clr r12
+      clr r13
+      
+      push xl
+        push xh
+          rcall NET_Buffer_CountUsed
+        pop xh
+      pop xl
+      mov r14, r16
+    pop yh
+  pop yl
+  
+  rcall NETMSG_Debug_Write               ; (R16, R17, R18, R19, R20, R21, Z)
+  ret
+
+
+
+writeBufferInfoToRegs:
+  ldi r17, 0xff
+  ldi r18, 0xff
+  ld r16, Y
+  andi r16, 0x80
+  breq writeBufferInfoToRegs_end
+  ldd r17, Y+(1+2)   ; cmd code
+  ldd r18, Y+(1+3)   ; source addr
+writeBufferInfoToRegs_end:
+  ret
+
+
+
 DEBUG1:
   ldi r19, 10
   ldi r20, 2
@@ -534,6 +683,7 @@ programRamBegin:
   sendTStatsCounter: .byte 2
   sendRStatsCounter: .byte 2
   sendMStatsCounter: .byte 2
+  debugMsgCounter:   .byte 2
 programRamEnd:
 
 

avr/modules/network/buffer.asm

@@ -11,10 +11,6 @@
 ; ===========================================================================
 ; defs
 
-.equ NET_BUFFER_INUSE_BIT          = 7
-.equ NET_BUFFER_IFACENUM1_BIT      = 1
-.equ NET_BUFFER_IFACENUM0_BIT      = 0
-
 
 
 
@@ -50,7 +46,7 @@ NET_Buffer_Alloc:
   ldi xh, HIGH(netBuffers)
   m_fixedbuf_reserve NET_BUFFERS_SIZE, NET_BUFFERS_NUM
   brcc NET_Buffer_Alloc_end
-  ldi r17, (1<<NET_BUFFER_INUSE_BIT)
+  ldi r17, (1<<NET_IFACE_BUFFER_INUSE_BIT)
   st X, r17
 NET_Buffer_Alloc_end:
   ret
@@ -78,7 +74,7 @@ NET_Buffer_ReleaseByAddr:
 ; @clobbers X (R16)
 
 NET_Buffer_ReleaseByNum:
-  rcall NET_Buffer_Locate          ; (R16)
+  rcall NET_Buffer_Locate          ; (R16, X)
   brcc NET_Buffer_ReleaseByNum_end
   rcall NET_Buffer_ReleaseByAddr   ; (R16)
 NET_Buffer_ReleaseByNum_end:

avr/modules/network/data.asm

@@ -13,7 +13,7 @@
 networkDataBegin:
   ; buffers for incoming and outgoing messages
   netBuffers:              .byte NET_BUFFERS_NUM*NET_BUFFERS_SIZE
-  netRingBufferMsgNumIn:   .byte NET_MSGNUMINBUF_SIZE
+  netRingBufferMsgNumIn:   .byte RINGBUFFERY_SIZE+NET_MSGNUMINBUF_SIZE
 
 networkDataEnd:
 

avr/modules/network/defs.asm

@@ -13,6 +13,11 @@
 .equ NET_IFACE_OUTMSGBUF_SIZE           =  4 ; max buffer nums in ringbuffer (per interface outbound)
 
 
+.equ NET_IFACE_BUFFER_INUSE_BIT            = 7
+.equ NET_IFACE_BUFFER_IFACENUM1_BIT        = 1
+.equ NET_IFACE_BUFFER_IFACENUM0_BIT        = 0
+
+
 ; interface generic data 
 .equ NET_IFACE_OFFS_IFACENUM            =  0 ; interface number (put into received messages)
 .equ NET_IFACE_OFFS_ADDRESS             =  1

avr/modules/network/iface.asm

@@ -163,5 +163,22 @@ NET_Interface_IncCounter16_end:
 
 
 
+; ---------------------------------------------------------------------------
+; @routine NET_Interface_SetIfaceNumInBuffer @global
+;
+; @param X   pointer to start of buffer
+; @param Y   pointer to start of interface data
+; @clobbers R16, R17
+
+NET_Interface_SetIfaceNumInBuffer:
+  ldd r16, Y+NET_IFACE_OFFS_IFACENUM
+  andi r16, (NET_IFACE_BUFFER_IFACENUM1_BIT | NET_IFACE_BUFFER_IFACENUM0_BIT)
+  ld r17, X
+  andi r17, ~(NET_IFACE_BUFFER_IFACENUM1_BIT | NET_IFACE_BUFFER_IFACENUM0_BIT)
+  or r17, r16
+  st X, r17
+  ret
+; @end
+
 
 

avr/modules/network/main.asm

@@ -64,7 +64,6 @@ NET_AddIncomingMsgNum:
 ;
 ; @return CFLAG on success, cleared on error
 ; @return R16 buffer number of the next incoming message
-; @param Y pointer to start of interface data
 ; @clobbers R17, R18, X
 
 NET_GetNextIncomingMsgNum:

avr/modules/network/msg/0BUILD

@@ -5,6 +5,7 @@
   <extradist>
     common.asm
     defs.asm
+    debug-w.asm
     device-w.asm
     memstats-w.asm
     recvstats-w.asm

avr/modules/network/msg/debug-w.asm

@@ -0,0 +1,53 @@
+; ***************************************************************************
+; copyright   : (C) 2025 by Martin Preuss
+; email       : martin@libchipcard.de
+;
+; ***************************************************************************
+; * This file is part of the project "AqHome".                              *
+; * Please see toplevel file COPYING of that project for license details.   *
+; ***************************************************************************
+
+
+
+; ---------------------------------------------------------------------------
+; @routine NETMSG_Debug_Write @global
+;
+; @param Y pointer to device to write msg for
+; @param X pointer to buffer to write to
+; @param r0-14 value 1-15
+; @clobbers R16, R17, R18, R19, R20, R21
+
+NETMSG_Debug_Write:
+  ldi r16, 0xff
+  st X+, r16                          ; dest address
+  ldi r16, 17                         ; msg code+src address+15 payload bytes
+  st X+, r16                          ; msg len
+  ldi r16, NETMSG_CMD_DEBUG
+  st X+, r16                          ; msg code
+  ldd r16, Y+NET_IFACE_OFFS_ADDRESS
+  st X+, r16                          ; src address
+
+  st X+, r0                           ; 5th byte
+  st X+, r1
+  st X+, r2
+  st X+, r3
+  st X+, r4
+  st X+, r5
+  st X+, r6
+  st X+, r7
+  st X+, r8
+  st X+, r9
+  st X+, r10
+  st X+, r11
+  st X+, r12
+  st X+, r13
+  st X+, r14
+
+  sbiw xh:xl, 19 ; go back to beginning of message (1 byte dst addr, 1 byte length, 17 bytes payload)
+  rcall NETMSG_CalcAndAddChecksumByte ; (R16, R17, R18, R19, R20, X)
+  sbiw xh:xl, 20 ; go back to beginning of message (1 byte dst addr, 1 byte length, 17 bytes payload, 1 byte crc)
+  ret
+; @end
+
+
+

avr/modules/uart_hw/comonuart0.asm

@@ -9,6 +9,8 @@
 
 
 .equ COMONUART0_IFACENUM = 1
+.equ COMONUART0_READ_TIMEOUT = 3
+
 
 
 
@@ -28,10 +30,25 @@ comOnUart0_iface: .byte UART_HW_IFACE_SIZE
 ComOnUart0_Init:
   ldi yl, LOW(comOnUart0_iface)
   ldi yh, HIGH(comOnUart0_iface)
-  rcall UART_HW_Interface_Init       ; (R16, R17, X)
+  rcall UART_HW_Uart0_SetAttnInput   ; (none)
-  rcall UART_HW_Uart0_Init           ; (R16, R17, X)
+
+  rcall UART_HW_Interface_Init            ; (R16, R17, X)
+  rcall UART_HW_Uart0_Init                ; (R16, R17, X)
   ldi r16, COMONUART0_IFACENUM
   std Y+NET_IFACE_OFFS_IFACENUM, r16
+  
+  ldi r16, UART_HW_READMODE_IDLE
+  std Y+UART_HW_IFACE_OFFS_READMODE, r16
+  ldi r16, UART_HW_WRITEMODE_IDLE
+  std Y+UART_HW_IFACE_OFFS_WRITEMODE, r16
+
+  sbi COM_IRQ_ADDR_ATTN, COM_IRQ_BIT_ATTN ; enable pin change irq for ATTN line
+  in r16, GIMSK                           ; enable pin change irq PCIE0 or PCIE1
+  ori r16, (1<<COM_IRQ_GIMSK_ATTN)
+  out GIMSK, R16
+  ldi r16, (1<<COM_IRQ_GIFR_ATTN)         ; clear pending irq by writing 1 to ATTN bit
+  out GIFR, r16
+
   ret
 ; @end
 
@@ -159,6 +176,194 @@ ComOnUart0_TxCharIsr:
 
 
 
+; ---------------------------------------------------------------------------
+; @routine ComOnUart0_AttnChangeIsr @global @isr
+;
+; @clobbers none
+
+ComOnUart0_AttnChangeIsr:
+  push r15
+    in r15, SREG
+    push r16
+      push r17
+        push r18
+          push r24
+            push r25
+              push xl
+                push xh
+                  push yl
+                    push yh
+                      ldi yl, LOW(comOnUart0_iface)
+                      ldi yh, HIGH(comOnUart0_iface)
+                      rcall comOnUart0ActOnAttn      ; (R16, R17, R24, R25, X)
+                    pop yh
+                  pop yl
+                pop xh
+              pop xl
+            pop r25
+          pop r24
+        pop r18
+      pop r17
+    pop r16
+    out SREG, r15
+  pop r15
+  reti
+; @end
+
+
+
+; ---------------------------------------------------------------------------
+; @routine comOnUart0ActOnAttn @global
+;
+; @param Y pointer to interface data in SRAM
+; @clobbers R16 (R17, R24, R25, X)
+
+comOnUart0ActOnAttn:
+  ldd r16, Y+UART_HW_IFACE_OFFS_WRITEMODE  ; test for active write mode
+  cpi r16, UART_HW_WRITEMODE_IDLE
+  brne comOnUart0ActOnAttn_end             ; in write mode, don't start read mode
+
+  ldd r16, Y+UART_HW_IFACE_OFFS_READMODE   ; test for active read mode
+  cpi r16, UART_HW_READMODE_IDLE
+  brne comOnUart0ActOnAttn_end             ; already in read mode
+
+  sbic COM_ATTN_INPUT, COM_ATTN_PIN        ; ATTN high?
+    rjmp comOnUart0ActOnAttn_end
+  rcall comOnUart0StartReading           ; (R16, R17, R24, R25, X)
+
+comOnUart0ActOnAttn_end:
+  ret
+; @end
+
+
+
+; ---------------------------------------------------------------------------
+; @routine comOnUart0StartReading
+;
+; @clobbers R16 (R17, R24, R25, X)
+
+comOnUart0StartReading:
+  rcall comOnUart0EnsureReadBuffer            ; (R16, R17, R24, R25, X)
+  brcs comOnUart0EnterReading_okay
+  ; no buffer, missed message
+  ldi r16, NET_IFACE_OFFS_ERR_MISSED_LOW
+  rcall NET_Interface_IncCounter16            ; (R24, R25)
+  ret
+comOnUart0EnterReading_okay:
+  ldi r16, UART_HW_READMODE_READING
+  std Y+UART_HW_IFACE_OFFS_READMODE, r16
+  clr r16
+  std Y+NET_IFACE_OFFS_READTIMER, r16
+  rcall UART_HW_Uart0_StartRx                   ; R16
+  ret
+; @end
+
+
+
+; ---------------------------------------------------------------------------
+; @routine comOnUart0EnterReadSkipping
+;
+; @clobbers R16
+
+comOnUart0EnterReadSkipping:
+  rcall UART_HW_Uart0_StopRx                   ; (R16)
+  rcall UART_HW_Uart0_Flush                    ; (R16)
+  ldi r16, UART_HW_WRITEMODE_IDLE              ; go into IDLE mode, enter reading on next neg edge of ATTN
+  std Y+UART_HW_IFACE_OFFS_READMODE, r16
+  ret
+; @end
+
+
+
+; ---------------------------------------------------------------------------
+; @routine comOnUart0EnterReadIdle
+;
+; @clobbers R16 (R17, R24, R25, X)
+
+comOnUart0EnterReadIdle:
+  rcall UART_HW_Uart0_StopRx                   ; (R16)
+  ldi r16, UART_HW_READMODE_IDLE
+  std Y+UART_HW_IFACE_OFFS_READMODE, r16
+  ret
+; @end
+
+
+
+; ---------------------------------------------------------------------------
+; @routine comOnUart0EnsureReadBuffer
+;
+; @clobbers R16 (R17, R24, R25, X)
+
+comOnUart0EnsureReadBuffer:
+  ldd r16, Y+UART_HW_IFACE_OFFS_READBUFNUM
+  cpi r16, 0xff
+  breq comOnUart0EnsureReadBuffer_alloc
+comOnUart0EnsureReadBuffer_secRet:
+  sec
+comOnUart0EnsureReadBuffer_ret:
+  ret
+comOnUart0EnsureReadBuffer_alloc:
+  rcall NET_Buffer_Alloc                        ; (R16, R17, X)
+  brcc comOnUart0EnsureReadBuffer_ret
+  rcall UART_HW_Interface_SetReadBuffer         ; (R17)
+  rcall NET_Interface_SetIfaceNumInBuffer       ; (R16, R17)
+  rjmp comOnUart0EnsureReadBuffer_secRet
+comOnUart0EnsureReadBuffer_noBuf:
+  ldi r16, NET_IFACE_OFFS_ERR_NOBUF_LOW
+  rcall NET_Interface_IncCounter16              ; (R24, R25)
+  clc
+  ret
+; @end
+
+
+
+; ---------------------------------------------------------------------------
+; @routine ComOnUart0_SendBuffer @global
+;
+; @param Y pointer to interface data in SRAM
+; @clobbers R16, R17
+
+ComOnUart0_SendBuffer:
+  push r15
+    in r15, SREG
+    cli
+    ldd r17, Y+UART_HW_IFACE_OFFS_WRITEMODE
+    cpi r17, UART_HW_WRITEMODE_IDLE
+    breq ComOnUart0_SendBuffer_setBuffer
+    out SREG, r15
+  pop r15
+  clc
+  ret
+ComOnUart0_SendBuffer_setBuffer:
+    rcall UART_HW_Interface_SetWriteBuffer    ; (R17)
+    ldi r17, UART_HW_WRITEMODE_WRITING
+    std Y+UART_HW_IFACE_OFFS_WRITEMODE, r17
+    rcall UART_HW_Uart0_StartTx               ; (R16)
+  pop r15
+  out SREG, r15
+  sec
+  ret
+; @end
+
+
+
+; ---------------------------------------------------------------------------
+; @routine comOnUart0ResetReadBuffer
+;
+; @clobbers R16 (R17, X)
+
+comOnUart0ResetReadBuffer:
+  ldd r16, Y+UART_HW_IFACE_OFFS_READBUFNUM
+  cpi r16, 0xff
+  breq comOnUart0ResetReadBuffer_end
+  rcall NET_Buffer_Locate                     ; (R17, X)
+  rcall UART_HW_Interface_SetReadBuffer       ; (R17)
+comOnUart0ResetReadBuffer_end:
+  ret
+; @end
+
+
+
 ; ---------------------------------------------------------------------------
 ; @routine ComOnUart0_Run @global
 ;
@@ -171,8 +376,12 @@ ComOnUart0_Run:
     ldi yl, LOW(comOnUart0_iface)
     ldi yh, HIGH(comOnUart0_iface)
 
-    rcall comOnUart0RunWriteModes
     rcall comOnUart0RunReadModes
+    ldd r16, Y+UART_HW_IFACE_OFFS_READMODE    ; test for active read mode
+    cpi r16, UART_HW_READMODE_IDLE
+    brne ComOnUart0_Run_end
+    rcall comOnUart0RunWriteModes             ; only call write routine if read idle
+ComOnUart0_Run_end:
   pop r15
   out SREG, r15
   ret
@@ -218,8 +427,7 @@ comOnUart0RunWriteIdle:
   rcall NET_Buffer_Locate                   ; (R17)
   brcc comOnUart0RunWriteIdle_end
 
-  sbi COM_ATTN_DDR, COM_ATTN_PIN            ; set ATTN as output
+  rcall UART_HW_Uart0_SetAttnLow
-  cbi COM_ATTN_OUTPUT, COM_ATTN_PIN         ; set ATTN low
 
   rcall ComOnUart0_SendBuffer               ; (R16, R17)
 comOnUart0RunWriteIdle_end:
@@ -265,8 +473,7 @@ comOnUart0RunWriteBufferEmpty:
 comOnUart0RunWriteBufferEmpty_setIdle:
   rcall UART_HW_Uart0_StopTx                  ; disable transceiver and interrupts (R16)
 
-  cbi COM_ATTN_DDR, COM_ATTN_PIN              ; set ATTN as input
+  rcall UART_HW_Uart0_SetAttnInput            ; set ATTN as input
-  cbi COM_ATTN_OUTPUT, COM_ATTN_PIN           ; disable pullup on ATTN
 
   ldi r16, UART_HW_WRITEMODE_IDLE
   std Y+UART_HW_IFACE_OFFS_WRITEMODE, r16
@@ -300,23 +507,9 @@ comOnUart0RunReadModes:
 ; ---------------------------------------------------------------------------
 ; @routine comOnUart0RunReadIdle
 ;
-; @clobbers R16 (R17, R24, R25, X)
+; @clobbers none
 
 comOnUart0RunReadIdle:
-  ldd r16, Y+UART_HW_IFACE_OFFS_READBUFNUM
-  cpi r16, 0xff
-  brne comOnUart0RunReadIdle_enterReading
-  rcall NET_Buffer_Alloc                        ; (R16, R17, X)
-  brcc comOnUart0RunReadIdle_noBuf
-  rcall UART_HW_Interface_SetReadBuffer         ; (R17)
-comOnUart0RunReadIdle_enterReading:
-  ldi r16, UART_HW_READMODE_READING
-  std Y+UART_HW_IFACE_OFFS_READMODE, r16
-  rcall UART_HW_Uart0_StartRx                   ; R16
-  ret
-comOnUart0RunReadIdle_noBuf:
-  ldi r16, NET_IFACE_OFFS_ERR_NOBUF_LOW
-  rcall NET_Interface_IncCounter16              ; (R24, R25)
   ret
 ; @end
 
@@ -328,6 +521,20 @@ comOnUart0RunReadIdle_noBuf:
 ; @clobbers none
 
 comOnUart0RunReading:
+  ldd r16, Y+NET_IFACE_OFFS_READTIMER
+  cpi r16, COMONUART0_READ_TIMEOUT
+  brcs comOnUart0RunReading_end
+  rcall UART_HW_Uart0_StopRx                   ; (R16)
+  ldd r16, Y+UART_HW_IFACE_OFFS_READBUFNUM
+  ldi r17, 0xff
+  std Y+UART_HW_IFACE_OFFS_READBUFNUM, r17
+  cp r16, r17
+  breq comOnUart0RunReading_enterIdle
+  rcall NET_Buffer_ReleaseByNum               ; (R16, X)
+comOnUart0RunReading_enterIdle:
+  ldi r16, UART_HW_READMODE_IDLE
+  std Y+UART_HW_IFACE_OFFS_READMODE, r16
+comOnUart0RunReading_end:
   ret
 ; @end
 
@@ -356,23 +563,20 @@ comOnUart0RunSkipping_end:
 ; @clobbers R16 (R17, R18, R24, R25)
 
 comOnUart0RunMsgReceived:
-  ldd r16, Y+UART_HW_IFACE_OFFS_READBUFNUM
+  rcall comOnUart0EnterReadIdle
-  cpi r16, 0xff
-  breq comOnUart0RunMsgReceived_end
-  rcall NET_AddIncomingMsgNum                 ; (R17, R18, X)
-  brcs comOnUart0RunMsgReceived_enterIdle
-comOnUart0RunMsgReceived_overrun:             ; reset/reuse current buffer
-  rcall NET_Buffer_Locate
-  rcall UART_HW_Interface_SetReadBuffer       ; (R17)
-  ldi r16, NET_IFACE_OFFS_ERR_NOBUF_LOW
-  rcall NET_Interface_IncCounter16            ; (R24, R25)
-comOnUart0RunMsgReceived_enterIdle:
-  ldi r16, 0xff
-  std Y+UART_HW_IFACE_OFFS_READBUFNUM, r16
-  ldi r16, UART_HW_READMODE_IDLE
-  std Y+UART_HW_IFACE_OFFS_READMODE, r16
-comOnUart0RunMsgReceived_end:
   ret
 ; @end
 
 
+
+; DEBUG begin
+  ldi r16, NET_IFACE_OFFS_HANDLED_LOW
+  rcall NET_Interface_IncCounter16            ; (R24, R25)
+; DEBUG end
+
+; DEBUG begin
+  ldi r16, NET_IFACE_OFFS_ERR_MISSED_LOW
+  rcall NET_Interface_IncCounter16            ; (R24, R25)
+; DEBUG end
+
+

avr/modules/uart_hw/defs.asm

@@ -8,11 +8,6 @@
 ; ***************************************************************************
 
 
-.equ UART_HW_BUFFER_INUSE_BIT            = 7
-.equ UART_HW_BUFFER_IFACENUM1_BIT        = 1
-.equ UART_HW_BUFFER_IFACENUM0_BIT        = 0
-
-
 .equ UART_HW_READMODE_OFF                = 0
 .equ UART_HW_READMODE_IDLE               = 1
 .equ UART_HW_READMODE_READING            = 2

avr/modules/uart_hw/lowlevel_uart0.asm

@@ -97,7 +97,97 @@ UART_HW_Uart0_Flush:
 ; @clobbers R16 (R17, R18, R24, R25, X)
 
 UART_HW_Uart0_RxCharIsr:
-  M_UART_HW_Uart_RxCharIsr 0
+  ; check for errors
+  lds r16, UCSR0A                              ; check for errors
+  andi r16, (1<<FE0) | (1<<DOR0) | (1<<UPE0)
+  brne l_hwerr
+  ; read char
+  lds r16, UCSR0A
+  sbrs r16, RXC0
+    rjmp l_end                                ; no data
+  lds r16, UDR0                                ; r16=received char
+  ; check read mode
+  ldd r17, Y+UART_HW_IFACE_OFFS_READMODE
+  cpi r17, UART_HW_READMODE_READING
+  breq l_storeChar
+  cpi r17, UART_HW_READMODE_SKIPPING
+  breq l_skipChar
+  rjmp l_overrun                              ; neither read nor skip mode
+l_skipChar:
+  clr r16
+  std Y+NET_IFACE_OFFS_READTIMER, r16           ; reset read timer
+  rjmp l_end
+l_storeChar:
+  mov r18, r16                                  ; r18=received char
+  ; check buffer
+  ldd r16, Y+UART_HW_IFACE_OFFS_READBUFNUM
+  cpi r16, 0xff
+  breq l_overrun
+
+  ; check for buffer overrun
+  ldd r17, Y+UART_HW_IFACE_OFFS_READBUFLEFT     ; r17=bytes left
+  tst r17
+  breq l_econtent                               ; msg too long
+
+  ; actually store byte, increment/decrement counters and pos
+  ldd xl, Y+UART_HW_IFACE_OFFS_READBUFPOS_LOW
+  ldd xh, Y+UART_HW_IFACE_OFFS_READBUFPOS_HIGH
+  st X+, r18                                    ; r18=byte to store
+  clr r16
+  std Y+NET_IFACE_OFFS_READTIMER, r16           ; reset read timer
+  std Y+UART_HW_IFACE_OFFS_READBUFPOS_LOW, xl
+  std Y+UART_HW_IFACE_OFFS_READBUFPOS_HIGH, xh
+  ldd r18, Y+UART_HW_IFACE_OFFS_READBUFUSED     ; r18=bytes in buffer
+  inc r18
+  std Y+UART_HW_IFACE_OFFS_READBUFUSED, r18
+  dec r17
+  std Y+UART_HW_IFACE_OFFS_READBUFLEFT, r17
+  breq l_msgFinished
+
+  ; check msg size
+  cpi r18, 2                                    ; bytes in buffer, exactly 2?
+  brne l_end                                  ; nope, done
+  sbiw xh:xl, 1                                 ; yes, determine message length (msgLen at previous pos)
+  ld r16, X+                                    ; read payload length byte
+  subi r16, -3                                  ; add 3 (dest addr, length, crc byte)
+  cpi r16, (NET_BUFFERS_SIZE-1)                 ; total msg length ok?
+  brcc l_econtent                             ; content error (msg too long)
+  subi r16, 2                                   ; subtract bytes already received
+  std Y+UART_HW_IFACE_OFFS_READBUFLEFT, r16     ; set new number of bytes left
+  brne l_end                                    ; jmp if still bytes left to receive
+
+l_msgFinished:
+  rcall UART_HW_Uart0_StopRx                    ; (R16)
+  ldd r16, Y+UART_HW_IFACE_OFFS_READBUFNUM
+  rcall NET_AddIncomingMsgNum                   ; (R17, R18, X)
+  brcs l_msgAdded
+  ; could not add msg
+  rcall NET_Buffer_ReleaseByNum                 ; (R16, X)
+  ldi r16, 0xff
+  std Y+UART_HW_IFACE_OFFS_READBUFNUM, r16
+  ldi r16, NET_IFACE_OFFS_ERR_MISSED_LOW
+  ldi r17, UART_HW_READMODE_IDLE
+  rjmp l_incCounterAndEnterMode
+l_msgAdded:
+  ldi r16, 0xff
+  std Y+UART_HW_IFACE_OFFS_READBUFNUM, r16
+  ldi r16, NET_IFACE_OFFS_PACKETSIN_LOW
+  ldi r17, UART_HW_READMODE_IDLE
+  rjmp l_incCounterAndEnterMode
+l_hwerr:
+  ldi r16, NET_IFACE_OFFS_ERR_IO_LOW
+  rjmp l_incCounterAndEnterSkipping
+l_econtent:
+  ldi r16, NET_IFACE_OFFS_ERR_CONTENT_LOW
+  rjmp l_incCounterAndEnterSkipping
+l_overrun:
+  ldi r16, NET_IFACE_OFFS_ERR_NOBUF_LOW
+l_incCounterAndEnterSkipping:
+  ldi r17, UART_HW_READMODE_SKIPPING
+l_incCounterAndEnterMode:
+  rcall NET_Interface_IncCounter16              ; (R24, R25)
+  std Y+UART_HW_IFACE_OFFS_READMODE, r17        ; set read mode
+l_end:
   ret
 ; @end
 
@@ -134,3 +224,32 @@ UART_HW_Uart0_TxCharIsr:
 
 
 
+; ---------------------------------------------------------------------------
+; @routine UART_HW_Uart0_SetAttnInput @global
+;
+; Set ATTN line as input (making it effectively HIGH due to pull-up resistor on
+; the line)
+;
+; @clobbers none
+
+UART_HW_Uart0_SetAttnInput:
+  M_UART_HW_Uart_SetAttnInput
+  ret
+; @end
+
+
+
+; ---------------------------------------------------------------------------
+; @routine UART_HW_Uart0_SetAttnLow @global
+;
+; Set ATTN line low.
+;
+; @clobbers none
+
+UART_HW_Uart0_SetAttnLow:
+  M_UART_HW_Uart_SetAttnLow
+  ret
+; @end
+
+
+

avr/modules/uart_hw/m_lowlevel_uart.asm

@@ -188,27 +188,14 @@ l_storeChar_%:
   brcc l_econtent_%                             ; content error (msg too long)
   subi r16, 2                                   ; subtract bytes already received
   std Y+UART_HW_IFACE_OFFS_READBUFLEFT, r16     ; set new number of bytes left
-  brne l_end_%                                  ; jmp if still bytes left to received
+  brne l_end_%                                  ; jmp if still bytes left to receive
 l_msgFinished_%:
-  ldd r16, Y+UART_HW_IFACE_OFFS_READBUFNUM
-  rcall NET_AddIncomingMsgNum                   ; (R17, R18, X)
-  brcs l_msgStored_%
-  ; msg complete but could not store
-  rcall NET_Buffer_Locate
-  rcall UART_HW_Interface_SetReadBuffer         ; reset/reuse current buffer
-  ldi r16, NET_IFACE_OFFS_ERR_NOBUF_LOW
-  ldi r17, UART_HW_READMODE_READING
-  rjmp l_incCounterAndEnterMode_%
-l_msgStored_%:
   ldi r16, NET_IFACE_OFFS_PACKETSIN_LOW
   ldi r17, UART_HW_READMODE_MSGRECEIVED
   rjmp l_incCounterAndEnterMode_%
 l_hwerr_%:
   ldi r16, NET_IFACE_OFFS_ERR_IO_LOW
-  rcall NET_Interface_IncCounter16
+  rjmp l_incCounterAndEnterSkipping_%
-  ldi r16, UART_HW_READMODE_SKIPPING
-  std Y+UART_HW_IFACE_OFFS_READMODE, r16        ; set read mode
-  rjmp l_end_%
 l_econtent_%:
   ldi r16, NET_IFACE_OFFS_ERR_CONTENT_LOW
   rjmp l_incCounterAndEnterSkipping_%
@@ -315,3 +302,38 @@ l_end_%:
 
 
 
+; ---------------------------------------------------------------------------
+; @macro M_UART_HW_Uart_SetAttnInput
+;
+; Set ATTN line as input (making it effectively HIGH due to pull-up resistor on
+; the line)
+;
+; @clobbers none
+
+.macro M_UART_HW_Uart_SetAttnInput
+  cbi COM_ATTN_DDR, COM_ATTN_PIN           ; set ATTN as input
+.ifdef COM_ATTN_PUE
+.else
+  cbi COM_ATTN_PUE, COM_ATTN_PIN           ; disable pullup on ATTN
+.endif
+  cbi COM_ATTN_OUTPUT, COM_ATTN_PIN        ; disable pullup on ATTN
+.endmacro
+; @end
+
+
+
+; ---------------------------------------------------------------------------
+; @macro M_UART_HW_Uart_SetAttnLow
+;
+; Set ATTN line low.
+;
+; @clobbers none
+
+.macro M_UART_HW_Uart_SetAttnLow
+  sbi COM_ATTN_DDR, COM_ATTN_PIN            ; set ATTN as output
+  cbi COM_ATTN_OUTPUT, COM_ATTN_PIN         ; set ATTN low
+.endmacro
+
+
+
+

avr/modules/uart_hw/ttyonuart1.asm

@@ -276,7 +276,7 @@ ttyOnUart1RunWaitBufferEmpty:
 ; ---------------------------------------------------------------------------
 ; @routine ttyOnUart1RunWriteBufferEmpty
 ;
-; @clobbers R16, R17, X
+; @clobbers R16, R17, X (R24, R25)
 
 ttyOnUart1RunWriteBufferEmpty:
   ldd r16, Y+UART_HW_IFACE_OFFS_WRITEBUFNUM
@@ -328,6 +328,7 @@ ttyOnUart1RunReadIdle:
   rcall NET_Buffer_Alloc                        ; (R16, R17, X)
   brcc ttyOnUart1RunReadIdle_noBuf
   rcall UART_HW_Interface_SetReadBuffer         ; (R17)
+  rcall NET_Interface_SetIfaceNumInBuffer       ; (R16, R17)
 ttyOnUart1RunReadIdle_enterReading:
   ldi r16, UART_HW_READMODE_READING
   std Y+UART_HW_IFACE_OFFS_READMODE, r16
@@ -380,14 +381,14 @@ ttyOnUart1RunMsgReceived:
   breq ttyOnUart1RunMsgReceived_end
   rcall NET_AddIncomingMsgNum                 ; (R17, R18, X)
   brcs ttyOnUart1RunMsgReceived_enterIdle
-ttyOnUart1RunMsgReceived_overrun:             ; reset/reuse current buffer
+ttyOnUart1RunMsgReceived_overrun:
-  rcall NET_Buffer_Locate
+  rcall NET_Buffer_ReleaseByNum               ; (R16, X)
-  rcall UART_HW_Interface_SetReadBuffer       ; (R17)
   ldi r16, NET_IFACE_OFFS_ERR_NOBUF_LOW
   rcall NET_Interface_IncCounter16            ; (R24, R25)
 ttyOnUart1RunMsgReceived_enterIdle:
   ldi r16, 0xff
   std Y+UART_HW_IFACE_OFFS_READBUFNUM, r16
+
   ldi r16, UART_HW_READMODE_IDLE
   std Y+UART_HW_IFACE_OFFS_READMODE, r16
 ttyOnUart1RunMsgReceived_end: