Moved routine sendValueMsg to Main_SendValueMsg in main.asm. Removed debug code.

avr/att84_temp1.asm

@@ -330,10 +330,8 @@ onEvery10s:
 onEvery30s:
 #ifdef MODULES_SI7021
   rcall SI7021_PeriodicMeasurement
-  rcall sendValueMsg
+  rcall Main_SendValueMsg
 #endif
-
-;  rcall Utils_SetupUid ; debug
   ret
 
 
@@ -385,86 +383,3 @@ onPacketReceived:
   ret
 
 
-
-
-
-
-#ifdef MODULES_COM
-debugSendByte:
-  push r15
-    in r15, SREG ; debug
-    cli
-    push r17
-      push r22
-        ldi r17, 8
-        sbi DDRA, PORTA2 ; debug
-        
-        cbi PORTA, PORTA2 ; debug (on)
-        Utils_WaitNanoSecs 100000, 0, r22 ; start with 2t low
-
-        sbi PORTA, PORTA2 ; debug (off)
-        nop
-        nop
-        cbi PORTA, PORTA2 ; debug (on)
-        Utils_WaitNanoSecs 100000, 0, r22 ; start with 2t low
-        
-        debugSendByte_loop:
-        lsr r16
-        brcs debugSendByte_sendLow
-        cbi PORTA, PORTA2 ; debug (on)
-        rjmp debugSendByte_wait
-        debugSendByte_sendLow:
-        sbi PORTA, PORTA2 ; debug (off)
-        
-        debugSendByte_wait:
-        Utils_WaitNanoSecs 100000, 0, r22
-        dec r17
-        brne debugSendByte_loop
-        
-        cbi PORTA, PORTA2 ; debug (on)
-        Utils_WaitNanoSecs 200000, 0, r22 ; end with 2t low
-        sbi PORTA, PORTA2 ; debug (off)
-      pop r22
-    pop r17
-    out SREG, r15
-  pop r15
-  ret
-#endif
-
-
-
-sendValueMsg:
-  ; send message for current temp
-  lds r22, si7021Flags
-  mov r16, r22
-  andi r16, SI7021_FLAGS_TEMP_VALID
-  breq sendValueMsg_checkHum
-  ldi r16, 0xff                      ; destination address
-  ldi r17, VALUE_ID_TEMP1            ; value id
-  push r22
-    ldi r22, AQHOME_VALUETYPE_TEMP
-    lds r18, si7021LastTemp            ; value
-    lds r19, si7021LastTemp+1
-    ldi r20, 100                       ; denominator
-    clr r21
-    rcall CPRO_EnqueueValue
-  pop r22
-sendValueMsg_checkHum:
-  mov r16, r22
-  andi r16, SI7021_FLAGS_HUM_VALID
-  breq sendValueMsg_done
-  ldi r16, 0xff                      ; destination address
-  ldi r17, VALUE_ID_HUM1             ; value id
-  push r22
-    ldi r22, AQHOME_VALUETYPE_HUMIDITY
-    lds r18, si7021LastHumidity        ; value
-    lds r19, si7021LastHumidity+1
-    ldi r20, 1                         ; denominator
-    clr r21
-    rcall CPRO_EnqueueValue
-  pop r22
-sendValueMsg_done:
-  ret
-
-
-

avr/main.asm

@@ -193,6 +193,7 @@ printSendStats:
     rcall LCD_PrintHexWord
 
 
+#ifdef MODULES_COM
     ldi r18, 0
     ldi r19, 4
     rcall LCD_SetCursor
@@ -233,11 +234,51 @@ printSendStats:
     lds r18, comStatsCollisions
     lds r19, comStatsCollisions+1
     rcall LCD_PrintHexWord
+#endif
  
   pop r15
   out SREG, r15
   ret
-  
+
+
+
+#ifdef MODULES_SI7021
+#ifdef MODULES_COM
+
+Main_SendValueMsg:
+  ; send message for current temp
+  lds r22, si7021Flags
+  mov r16, r22
+  andi r16, SI7021_FLAGS_TEMP_VALID
+  breq sendValueMsg_checkHum
+  ldi r16, 0xff                      ; destination address
+  ldi r17, VALUE_ID_TEMP1            ; value id
+  push r22
+    ldi r22, AQHOME_VALUETYPE_TEMP
+    lds r18, si7021LastTemp            ; value
+    lds r19, si7021LastTemp+1
+    ldi r20, 100                       ; denominator
+    clr r21
+    rcall CPRO_EnqueueValue
+  pop r22
+sendValueMsg_checkHum:
+  mov r16, r22
+  andi r16, SI7021_FLAGS_HUM_VALID
+  breq sendValueMsg_done
+  ldi r16, 0xff                      ; destination address
+  ldi r17, VALUE_ID_HUM1             ; value id
+  push r22
+    ldi r22, AQHOME_VALUETYPE_HUMIDITY
+    lds r18, si7021LastHumidity        ; value
+    lds r19, si7021LastHumidity+1
+    ldi r20, 1                         ; denominator
+    clr r21
+    rcall CPRO_EnqueueValue
+  pop r22
+sendValueMsg_done:
+  ret
+#endif
+#endif
 
 
 textSi7021Firmware:      .db "SI: ", 0, 0